I Know, I’m Late For An Advent Candle Arrangement, But Hey It Is For XMAS Too. And Our Sims Can Celebrate

annigo’s OMSP’s 1cm to 10cm

Hello!

Today I bring you the good old OMSP's. Because I often realize how much I miss them in game. You may think that them are unnecessary, because you can move the objects up in height with the moveobjects-cheat ('moo') and because many creators provide their surfaces with a lot of slots. You're right, but still I think it makes sense. How many times do I have a surface or whatever in game that doesn't have the slots I would like. So it's not up to me to edit them in S4S, because it's not my creation. And in height you can adjust the objects in only 10cm steps. Then sometimes there is a gap between the object and the surface. Indeed there are a few OMSP's, for example from Severinka or Kitcat Simporium but only for the classic surfaces and seating but not for every height. So I made 10 small OMSPs covering every centimeter, not Milimeter, that would lead too far. ^^  You can also adjust the height when the 'moo' is active, so you can place almost any decoration for surfaces anywhere. Sometimes you don't need to make a slot invisible if the object is larger and the slot is completely obscured by the surface. But you can make it invisible and visible again through the design tool, if you know exactly where it is. Here just are some examples...

But beware! If you plan to re-paint your walls after decorating with the Slots (OMSP's), make sure that the moveobjects-cheat is disabled, otherwise EVERYTHING will end up in the family inventory. And even with the cheat off, the same thing happens when you place slots with objects on halfwalls. So do not wonder. It's not my fault, it's the game. As can be seen in the last two pictures, everything that is marked in yellow will disappear when papering...

Hope you like it. Have fun!  ^^

Visit me here

DOWNLOAD (SFS) 

or: GoogleDrive

It is very cool, thank you... but where is the shelf itself? ^^

Why why still anyone hasn’t separated this amazing shelf yet??! 

Anyhow lets repair: MERGED / SINGLE PACKAGES

Indoor Clothesline

I’ve created a new clothesline that can be placed indoors (unlike the original one). It has no posts since it’s meant to be placed between two walls, like shown in the picture and it’s also higher up compared to the original one. I’ve removed the footprint so it can still be used in small rooms (sims can pass under it and use the other objects too). Rain will not affect it either (unless you place it outdoors). It costs §200, same as the original, and only has one swatch since in the original only the post changed colors. Laundry Day is required (obviously).

Note: When it breaks, you have to replace it by a new one. The “Repair” interaction won’t work due to animation constraints because of the wall. I’ve tried to make it unbreakable by creating a new tuning but the game would no longer recognize it as a clothesline so I kept the original tuning.

DOWNLOAD

Please keep us our most important Sims CC Finds Blog! ❤️ 

@staff

Guys! Who is not indifferent to sssvitlans.tumblr.com support! Huskies and reposts in support of what Tumbler would remove from sssvitlans NSFW !!!! This post will be sent to the support service Tumbler with the request of all of us not to close our favorite blog!

@staff

******************************************** Ребята! Кто не безразличен к sssvitlans.tumblr.com поддержите! Лайки и репосты в поддержку того что бы Тамблер снял с sssvitlans NSFW!!!! Данный пост будет направлен в службу поддержки Тамблер с просьбой нас всех не закрывать  любимый блог!

@staff

OMG! I absolutely love all your stuff! TY!  🤩😍❤️

MODERN HOUSEWARES STUFF PACK [Custom Content]

I am extremely excited to finally share with you what I have been working on for the past few months! This is probably the most ambitious CC Pack I have ever created, containing over 30 objects made for various rooms of the house! Interesting fact, this pack initially started as an “addon” for Moschino Stuff Pack before it evolved into a much larger project! Nevertheless, this CC Pack is completely Base Game Compatible! I hope you enjoy!

Here’s my attempt at an overview video for you guys

Decorate your house with modern furnishings, ranging from modern counter sets in the kitchen, complete with separated cooktops and ovens and simple sofas and coffee tables in the living room, to sleek furnishings in the bedroom and dining spaces.

Every object contains the same matching swatches, allowing them to be used seamlessly together, and with various other objects in the game, especially the objects in Moschino.

SFS Download (Merged Package)

SFS Download (Separated ZIP)

SFS Download (Occluder Override)

- My Patreon if you’d like to support my work (Optional) -

The Occluder Override is recommended as it prevents weird shadows from appearing on my cabinets when an appliance is placed under them. This occurs as I changed the shading properties of them in order to workaround an issue which affects ALL Cabinets in the game which cause all corner pieces to appear darker than the rest. This fix applies to all Maxis Appliances.

If you encounter any issues, please message me on Tumblr or Twitter!

I know, I’m late for an Advent Candle Arrangement, but hey it is for XMAS too. And our Sims can celebrate Christmas all 28 Days. So I’ve been not too late? 👼 

This arrangement has 4 slots for place 4 candles. So our Sims can celebrate advent. Every sunday a flame more. 😊

The arrangement you can find in Decor/Plants and cost 100§ and the candle in Table-lights and it costs 1§. I hope, you will like it.

I wish you all a Merry, Merry Christmas and a Happy New Year! 🎄 🎅🏽 🎁 🍾 💝

Download SFS (without ads)

More Desert Luxe Kit Awnings

Hi guys! I love this Desert Luxe Kit Awning. But it is just one piece in 4 units wide. Not every backyard has dimensions that are divisible by 4 and sometimes back yards also have corners, inside and outside. So I made 5 more, 1 unit wide, 2, untis wide, 3 units wide, an inner corner and an outer corner. Btw. I must make the outer corner so huge, otherwise you can't set it on corner wall. My first model was not bigger than the inner side. And I must say, I love it! ❤️ Hope you'll like it too. 😊

Oh and Desert Luxe Kit is required. Sorry!

DOWNLOAD (sfs with no ads, never!)

Here is an older Post by me on Sims4Studio .

Hi guys, today I bring you a modificated version from the CL 1x1 Desk with the compartment for books. I like this desk for small apartments or tiny starter homes. But I was wondering, why this book-compartment doesn't have the function as bookcase too. My new is now a 2in1-version. I hope, you like it. The EP City Living is required. You can find it under desks and bookcases. It comes in all EA colors. Feel free to recolor for your own taste but please without the mesh and with a link to my Download Page. Thank you! ❤️

DOWNLOAD (SFS)

Mix’n Match Curtain Set vol. 1

Hey you all, today I will bring you a begin of a curtain Set which is going to expand gradually. You might think, 'What set, I see only 2 curtains here?' You’re right but this set contains 10 pieces. They are the basis for everything else.

I could have kept working, but I'm having trouble concentrating. Can't make such big sets anymore. Lose the overview, the concentration and finally the joy and it will never be uploaded. That's how it happens only piece by piece. I hope you understand that. 😏

The curtains comes in 16 different patterns and colours, so they have 32 swatches.The back side looks different then the front side. And I have to warn you, they are a bit high poly (4000 one side) because they needed 2 planes for front and back. I've turned the polygons down as far as they can, without any great loss of quality. Come on... the original has 40000 polys and this without front or back. 😇 You can ‘hang’ the curtains on window without the bb.moveobjects on. But für position the laterally curtain holders and curtain rods, the cheat must be activate and then adjust in high. I don't wanted to apply the rods directly to the curtains because the different versions and swatches. That would have been too much curtains swatches. In addition, it is supposed to be a mix'n match set, so surely other Rods and rails will come to combine.🧐

So it gives a left, middle and a right side for builds a endless rod. ;) The counter shader ensures that it is seamless. There is also a mid-rod holder for the "static". It looks like more realistic. Then it gives a left and a right single rod too, it fits only the rightly side from the curtain because the rings are positioned differently. 

Well, now I've talked you enough, now look yourself. 😊

Download here   SFS (without adf.ly or others)

TOU:

You have the permission for recolor my objects, but don’t offer my meshes but rather set a link to my side. Don’t load up my meshes on other pages and give them as yours!

And Simsdom, if you become aware of me, don’t offer and hide my creations behind from paysites, ad.fly or what ever. My stuff is free and you doesn’t have the right to make money with that!

More DHD Cupcake Lights Please!

Sometimes I don't understand the creators at EA. Sometimes they make a ceiling light in 3 different heights and sometimes not. Why? Then why the hell did they give us 3 different height walls? So that pendant lights that are too short look ridiculous?

Anyway, I think the cupcake lights are so cute, I had to have them in several heights. Even though I usually just play with the normal wall height, I love playing with the heights and making the lights smaller if necessary, as you can see in the next pictures.

The lights come in every original Swatch, of course, and a few Recolors, though not 100 or so, just a few that suit my taste. There is an extra recolour file for the original lights. As you can see, I have a fable for lilac shades. Feel free to create your own recolours and delete mine if you don't like them.

By the way, on the last picture you can see only my recolours.

Download: SFS (without ads)