This… This Can’t Be Real. Somebody Tell Me I’m Getting Goncharoved

Adobe is going to spy on your projects. This is insane.

It is with the deepest frustrations that I must report Microsoft has pushed out Copilot onto Microsoft Word no matter what your previous settings were. If you have Office because you paid for it/are on a family plan/have a work/school account, you can disable it by going to Options -> click on Copilot -> uncheck 'Enable Copilot'.

(Note, you may not see this option if you haven't updated lately, but Copilot will still pop up. Updating should give you this option. I will kill Microsoft with my bare hands.)

In addition, Google has forced a roll-out of it's Gemini AI on all American accounts of users over 18 (these settings are turned off by default for EU, Japan, Switzerland, and UK, but it doesn't hurt to check).

To remove this garbage, you must go to Manage Workspace smart feature settings for all your Gmail/Drive/Chat and turn them off. Go to Settings -> See all settings -> find under "Genera" the "Google Workspace smart features" -> turn smart feature setting off for both Google Workspace and all other Google products and hit save. (If you turned off the smart settings in your Gmail, it never hurts to open Drive and double-check that they're set to off there too.)

Quick Edit: I found the easiest way to get to the Smart Feature settings following the instructions above was to do it through Drive. Try that route first.

Now is the time to consider switching to Libre Office if you haven't already.

crying

Matt is harassing Avery on twitter now

Art by Lanipuna

Kanto Starter Pokemon Japanese Ukiyo-e Style Artwork made by Lanipuna

Legendary Holy Blade, by nolan192

FFS’ Guide to Mattresses:

The following is a non-comprehensive list of questions I get asked a lot and is hopefully a good resource for anyone looking for a new mattress. I am not a scientist. I just sell beds. All bed knowledge is centered in the US, my apologies to international folks.

If this guide proves helpful you can consider popping a tip over on my Ko-fi to say thanks!

What’s the first step?

Well, first thing is gonna seem kind’ve obvious but a lot of people get mattresses secondhand and don’t think about it. Determine the feel you like! There’s no reason to sleep on a hard bed unless you like it, it’s not any better for your back. The three standard feels are firm, medium, and soft. Soft is called plush for stupid reasons. So find out which you like! It’ll narrow down what you look at, and save you time.

When trying out mattresses, use an A-B method. Do not compare every bed. Compare two at a time, otherwise you end up a confused mess. Pick one between the two that you like better, then put that one up against the next choice.

When you eliminate a bed it’s dead to you. Forget it. It was not as good as your new favorite and does not deserve to be remembered. If you cannot pick between two you will be tempted to try a third- this is the devil talking. A third will just make your life harder. If you truly can’t pick between beds that are comparable and they both feel nice after feeling your feelings then pick the cheaper one.

Lastly, mattresses are a huge example of “you get what you pay for”. Investing will pay off. Don’t get sticker shocked, budget what you can but know that mattresses can be freakin expensive. If you go into a store and see $5000 price tags, don’t worry, that’s not all they carry, but focus on the feel of the bed at first rather than price tag.

If you find one you love but it’s too much, the salesperson will know a comparable roll down or will usually try to help you get a deal. If you can admit, “I like this but it’s too much” they’ll work with you to find a solution.

What firmness is best?

This varies person to person but firm beds are not necessarily better for your body. Really. There’s two parts to a good mattress: support and comfort. Support goes underneath and is generally springs or incredibly dense foam. If a bed has good support, you can get away with lots of comfort.

The comfort layer exists to be gentle on your joints and pressure points. People who sleep on their side really need this comfort layer. Without this your shoulders and hips can’t circulate blood and you’ll end up tossing and turning every time your arm starts to fall asleep.

Back in the 1950’s when interconnected coils were the only thing on the market it made sense that you needed them to be firm, otherwise you’d get no back support. But nowadays coils are individually free standing, they do a much better job supporting bodies and bonus, they don’t have to be rock hard.

Most people should get somewhere around a medium bed rather than super firm or super soft but it depends on the persons preferences as all three can be good for you.

How can I tell if a bed has good support?

I’m so glad you asked. You lay on it. There’s a natural curve to the human spine. Lay first on your back. The arch in your lower back, that’s your lumbar. A good bed will push up and fill that area. If your muscles are trying to maintain that arch all night without help it will cause back pain and tossing. The more a bed fills your lumbar the better you can sleep.

Next, lay on your side. You’ll want to focus on your shoulders and hips. Good support on your back is great, but a mattress should have enough squish not to pinch off circulation. Lay for at least five minutes on your side unless you hate it right off the bat, I’m not saying every bed needs this in depth just the one you’re seriously considering. If you feel like you already need to roll over it’s too hard, go softer.

Should I get a topper?

A thousand times no. Toppers are used as a wide ranging bandaid from “there’s a hole in my bed” to “my back hurts”. Commercially available foams in toppers are significantly worse than the foams found in beds. They break down faster and sleep hotter than what they make mattresses with.

The only scenario in which you need a topper is if you’re stuck with a bed that’s too firm for you and you need it a little softer. That’s it. It can make your bed a little softer. It cannot fill holes or fix a bed with bad support. Generally aim to be over $200+ or the topper will break down ridiculously fast and be super hot to sleep on.

What do I do if there’s a divot in my bed?

First off, waterproof protectors can help avoid this problem, so take your bed divot as a life lesson and use a protector on all beds going forward. Our sweat and humidity breaks down foam like nobodies business, causing permanent damage.

So you have a divot, what now? Depends how entrenched it is. When beds get slept on every night for years the foam where a body lays compresses down, and the foam around it stays untouched. You’ll naturally start sinking. But you can get up and walk or crawl along all the foam that isn’t get slept on. If your divot is years deep it may be beyond saving but it’s worth a shot.

You can also rotate beds head to foot every six months and switch the side you and your partner sleep on or sleep all over the bed if you’re alone in it.

If the bed is over ten years old thank it for its service and get a new bed.

When should I get a new bed?

It’s worth checking your sleep quality at ten years into a mattress. The average life expectancy of a bed is 7-9 years. Not because the bed gave out necessarily but because human bodies change. We gain and lose weight, suffer injuries and age. A bed that worked for us eight years ago might not be what we need anymore. So just general age check is good. This is subject to the kind of mattress, bed in a boxes average 3-4 years of comfort so check in sooner.

But additionally: if your bed has a deep body trench where you’ve been sleeping, or if you’re waking up achey or in pain. There’s health problems that can reduce your sleep but a lot of people never suspect their mattress is sabotaging their rest, so keep it in mind.

How do I clean my bed?

Oh boy. You don’t. This goes back to water proof protectors. Your bed is not something you can pop in the wash. But it is something you will sweat and live in for upwards of ten years. Dust mites, dead skin cells, dust mite corpses, dust mite feces, allergens, skin oils. All those things will seep into the bed over time and spoiler alert it’s not great to breathe it in every night.

Sheets only catch a fraction of it, so a waterproof protector keeps the bed safe from your sweat breaking it down, but it keeps you safe from all the things that can build up in a mattress.

If you must clean a mattress I recommend a professional steaming service rather than trying to do it on your own but take this going forward: always protect your bed.

When should I get a new pillow?

Does your pillow have a waterproof protector on it? If no the answer is probably “right now”. Doctors recommend keeping a pillow no more than two years. This is because they’ll lose support and get yucky gross over those two years. If you get a memory foam pillow and get a protector on it they can last way longer. My oldest pillow was around seven years old.

Cheap polyfill pillows you buy at Target or Walmart are really only going to last three months before they wear out. If you are using more then one pillow at night you need a new pillow. Every time you have to wake up and adjust the multiple pillows you’re losing sleep.

Memory foam pillows can be more expensive but will last exponentially longer so save up and spend $50+ on a pillow you’ll actually get to use for a long time rather than $10 on one that will give you a few months of comfort.

What do I look for in a good pillow?

A good pillow is an extension of your spinal support. It should keep your neck aligned with your spine. Ideally, you are laying on a bed to try out a pillows height. It should match the width of your shoulder.

Most mattress stores can fit you for a pillow, but you can also bring a buddy to check your spinal alignment is straight. Side sleeping is most critical to get the height right. Back sleeping you just don’t want it too tall to force your chin down, and stomach you want it low enough not to push your neck up.

If I’m sleeping well do I really need to replace it (beds/pillows)?

Are you really sleeping well? Replacing beds or pillows is inherently stressful and a lot of peoples happy place is their bed. It’s hard to give up aspects of that cozy zone. If you’re really truly sleeping well no one is gonna make you change.

But generally if you find yourself asking this question you may be trying to convince yourself that things are good enough and ignoring that they could be much better.

Get a sleep tracker if some kind. Let it run for a week or two to see how much you’re tossing and waking up. If it’s a lot and your bed/pillow are old, it’s a good bed they’ve served their time.

If you ever wake up to readjust pillows (or at any point you’re using more than one pillow or mattress) then yes. You need a new one.

Good sleep is the result of the least disruptions. Anything you need to adjust in the middle of the night deserves a hard look and a boot to the curb.

Why shouldn’t I have my mattress flat on the floor?

Mold. Mold mold mold. Remember when I talked about how human bodies are humid? We put out a ridiculous amount of moisture as we sleep from exhalations to sweat. That builds up in the sponge under you and then your body heat maintains the ideal temperature to grow all sorts of nastiness.

You would not believe the amount of molded out beds I’ve seen. Even in the most arid areas, mold. It’s not worth it. Do not leave your bed on the floor. There’s like 2” frames if you like a low bed. If you must have your bed on the floor tip it up against a wall to ventilate every day. Mold will not wait for an invitation.

Japanese futons get brought up a lot here and first off- they get moved every night and washed regularly. Then left to ventilate. They understand that if they left it there it would mold.

Why do I sleep in X position?

Generally your body really wants your spine to curve in the right ways. Sleeping on your back would be ideal if the bed gave you everything you needed but most beds struggle to fill the lumbar. So when your muscles can’t hold your lumbar curve and want a break you roll onto your side.

Stomach sleepers are a case of back muscles fully declaring that nothing can support them and opting to invert rather than deal with poor support. It’s fully the worst sleeping position.

Before I sold beds I was almost 100% stomach sleeper due to scoliosis and back pain. Sometimes side. When I got my new bed I switched to only side and occasionally even back, which astonished me. As my bed has become less what I need I’ve reverted to occasional stomach bouts and less back sleeping.

Why don’t you like bed in a box?

Let me count the ways.

Box beds are the fast fashion of the bed world. They essentially corrupt the support part of the bed equation in order to get a product that can feasibly roll up and be compressed down. The foams are all lower density than they should be and give out quicker. The coils are significantly less steel.

The world cried out for an inexpensive bed and companies responded by giving you significantly less bed per dollar. They often use fiberglass as their flame retardant a requirement for all beds and there’s many testimonials about how poorly that’s gone for people.

But now the greatest sin of boxed beds is that they have the audacity to be marketed at the same price points of traditional beds that don’t roll up.

This robs the consumer of longevity. They’re a rip off. I sell them now at my store and I will do everything in my power to turn folks away onto beds that will actually do their damn job rather than bed mimics.

If you have a bed in a box, please understand that you’ll still get up to five years out of it, and you’re not foolish for buying one. They’ll still always be better than an old broken bed, just look to replace it sooner.

What is a good price point for a new bed?

This is really subjective, but you can get a queen size bed with independent coils for around $600. That’s the lowest good back support I’ve seen. You’ll get ten years out of it and it’ll be a bed.

Stepping into the $1000 mark gives better back support and pressure relief. Up from that they’re going to get more conforming.

Beyond $2000+ you’re generally paying for cooling. It’s the number one thing people want in a new bed but it costs more to give.

Rank Costco, IKEA, or bed in a boxes?

Bed in a box are my lowest tier, for reasons I’ve spoken of at length.

IKEA is next. They’re generally not boxed as of the last time I investigated ikea beds but they’re also just bare bones. Not a lot of either support or comfort, they tend to be around dorm quality.

Costco is a bit of a cheat here. See, they’re a wholesaler but mattresses aren’t something that overstocks- they’re made to order. Costco still wanted to offer a cheap option. So Costco gets beds made to order for really cheap. Now how can Costco offer it so much cheaper? By putting roughly 1/3 less stuff in it by category.

I had a spreadsheet laid out at one point to compare a sealy I carried against what looked like a comparable Costco bed. Every single component was shaved down. Each layer of foam, each coil, they all were about 1/3 less material than our better bed.

Now of course Costco sells boxed bed. So a non-boxed Costco bed is still better than an old broken bed and Costco will basically always take it back which is why they score higher than others but you’re still only going to get about three to five years out of it.

If this guide was helpful you can consider popping a tip over on my Ko-fi to say thanks!

What on earth is going on in the Star Trek fandom today, it's like my dash exploded

lol 28 years ago today, the Star Trek Voyager episode "Threshold" aired. The premise of the episode was that humans cannot travel at or faster than warp 10, because if they do, they would be traveling at "infinite velocity" and would exist in all points of space time simultaneously. Tom Paris found a way to travel at this speed, and doing so accidentally hyper-evolved him and his captain (Janeway) into giant salamanders, whereupon they immediately reproduced and created 3 baby salamanders. They were then turned back into normal humans, and forced to leave their salamander babies on the planet they had escaped to.

The episode was long held as the worst star trek episode. Not just the worst Star Trek Voyager episode, but the worst episode, period, because it was extremely weird and people turning into salamanders greatly annoyed a lot of people who don't know what fun is. Tumblr, having discovered this episode like excavating an exciting fossil, has taken a shine to this episode and many people now produce art and memes and eat pepperoni pizza in celebration of its air date, mostly to annoy the episode's creator, as in a very Arthur Conan Doyle way, he hates this episode and wants it de-canonized.

Anyway, happy Threshold Day!

Essentials You Need to Become a Web Developer

HTML, CSS, and JavaScript Mastery

Text Editor/Integrated Development Environment (IDE): Popular choices include Visual Studio Code, Sublime Text.

Version Control/Git: Platforms like GitHub, GitLab, and Bitbucket allow you to track changes, collaborate with others, and contribute to open-source projects.

Responsive Web Design Skills: Learn CSS frameworks like Bootstrap or Flexbox and master media queries

Understanding of Web Browsers: Familiarize yourself with browser developer tools for debugging and testing your code.

Front-End Frameworks: for example : React, Angular, or Vue.js are powerful tools for building dynamic and interactive web applications.

Back-End Development Skills: Understanding server-side programming languages (e.g., Node.js, Python, Ruby , php) and databases (e.g., MySQL, MongoDB)

Web Hosting and Deployment Knowledge: Platforms like Heroku, Vercel , Netlify, or AWS can help simplify this process.

Basic DevOps and CI/CD Understanding

Soft Skills and Problem-Solving: Effective communication, teamwork, and problem-solving skills

Confidence in Yourself: Confidence is a powerful asset. Believe in your abilities, and don't be afraid to take on challenging projects. The more you trust yourself, the more you'll be able to tackle complex coding tasks and overcome obstacles with determination.

cotton twill jackets my beloved ✨

available in sizes small-3xl with our own unisex size chart! SHOP