My Latest Sewing Creation. I've Been In A Bit Of A Rut Hobby Wise For A While So It Feels Good To Make

Forgot to post biiiiiiig proto-pink Muriel yesterday <3

Follow the Kickstarter here to be notified on launch! (aiming for September 5th ^^)

My dolls)

Photo by ig @gray_valet

Hi guys) The package with the previous mouse group order arrived in the US. The rest does not depend on me. So I'm making a post to show everything I can offer. Shipping from Russia is quite expensive, starts from about 70 USD for EMS, which I usually use. So it makes more sense for foreigners if someone organizes a group order to share the shipping cost. This has already been done twice. And I believe there is a discord group about this. But I will give you approximate numbers: This is about 70 USD for up to 1 kilogram 90 USD for up to 2 kilograms and about 105 USD for up to 3 kilograms.

This post is going to be huge so I'll put the prices on top:

15cm mouse. 73 usd for standard colour. +7 usd for extra colour.

25cm turtle. 230 usd.

28 cm 1/6 boy doll. 110 usd for Eirwyn 120 for character heads cause of their hair/ear parts.

MSD Eirwyn. 180 usd.

Speaking of group orders I would prefer not to go above 1000 USD in one box because I don't trust US Customs one bit. And if something bad is destined to happen - I would prefer it not to be a terribly large amount of money.

I can change the prices over time. I most likely will. I'm just groping for a while. The difference in price is more due to the amount of manual work I have to put into the doll than to the size. Turtles are far and away the most complex. And human dolls are less time-consuming. If I make a few and feel that it is more difficult or easier than I thought - I will change the prices. As you can see, so far I have only sold mice.

So what do I offer?

I'm obviously offering mice.

This is around life size mouse doll. Almost 15 cm standing tall and including ears.

I use ABS-like photopolymer resin for these dolls. Because it is easier to work with and looks more polyurethane-like. Mice have a lot of small delicate parts that would be harder to make look good with a harder resin. So it's a tradeoff. I prefer aesthetics over durability. I am not saying that ABS-like resin is too brittle. Many people use this type of resin for dolls. Especially small ones. I am just explaining why I use different types of resin for different dolls. I might consider printing a mouse with the tough resin I use for my larger dolls but that would cost more because it would take more time to post-process.

The colors "from the can" are gray and white. I can also print beige and chocolate at any time. Because these are the most basic colors and I can cut the leftovers. (Beige and chocolate may differ slightly from time to time because I due them myself. White and gray are constant.)

I can mix any color (green, purple). But there must be 2 or more mice of this color in the order. Otherwise it will be counted as an extra color because I will have a lot of leftovers that I will not be able to use.

There is also an option to add pink paws or tail or both. If the doll has 2 colors in it, it is counted as an extra color.

2. Turtles.

Photo by ig @gray_valet

Yes, I finally decided to try and start selling them.

They are 1/6 size. About 25 cm. A little shorter than Barbie. But wide and heavy.

There are 4 sculpts. Each of which has an individual head and some differences in the body.

Officially I name the sculpts by numbers, not by character names. but I think the characters are pretty obvious.

So #1 (Leo)) He's my princess >W< Lol. Sorry. This sculpt is quite beefy. But has the most delicate face and front shell of them all for my taste.

№2 (Raph)

This one the widest and most monstrous of them all. He was actually designed to be a little shorter than the first one, but he refused and ended up the same height.

№3 (Don) He is a little taller and thinner than the others. I tried to make him more human in proportions and face.

№4 (Mike) He's the baby of the group. I still wonder if I made him too small. But I like him as is.

Each of them has 3 faces on magnets. Neutral, angry and happy.

For turtle dolls I use a tough resin. Because they are actually big, even though they are short. And they have quite a strong elastic tension. It's a little less pretty than the ABS-like. But it's really tough. I have a video of me throwing it on the pavement.

Turtles have 3 colors. For the skin, plastron and shell. You can send me a picture and I will try to dye the resin as close as I can.

I will add 2 pairs of the chosen color eyes and 1 pair of white to the doll.

I can also print basic katanas and sais in a size suitable for the doll. In a random color.

3. 1/6 youth doll.

This body is about 28cm and is sculpted to represent a teenage boy in a Barbie-proportioned world.

This can go with my original Eirwin head and resin hair

Or an anime head with a hairstyle representing a character from the Genshin Impact game.

(Keep in mind that 1/6 of the sculpts has sculpted eyelashes) At the moment I have

Tighnari with magnetic ears (It's my friend's doll)))

and Cyno

Lol I even made his hair articulated.

I also tried to put a Barbie head on this body and it wasn't terrible)

I print these dolls with tough resin as well. Even though they are small they aren't very detailed so it's just nice to have a little more durability.

I can try to dye the color you want. But I can't promise 100% accuracy because one is the pictures on the screen and the other is the resin and pigments. And also I do not recommend dark skin colors. because this resin is very thick and it can reject the pigment while printing. With dark colors it can lead to a slight difference of the color between parts in one doll.

And last but not least...

4. MSD Eirwyn.

The MSD version of this sculpt has some differences from the 1/6 version. It has a wider neck, smaller eyes, and no sculpted eyelashes.

Eirvin is 45cm tall and is adjusted to fit into my company MSD doll group. (Photos with Dollzone and Resinsoul)

10mm eyes, 55mm feet. The only non-standard part of him is his butt. It's quite wide for a MSD) But I like the silhouette.

I print my dolls with full infill so it weighs the same as the cast doll.

Obviously I'm printing such a big doll with tough resin. And with such a size of parts I'm mostly calm for this doll. My cat has already given it a couple of test falls from the table.

For color - I also do not recommend dark here. For large parts and almost 10 hours of printing it can give a big difference in color.

I don't mind answering questions and taking additional photos if needed.

Congratulations) You survived my longest post.

Look man it's taken me almost 30 years to figure out a fraction of who I am and maybe that's an indicator of how slowly I learn or maybe that's just how long it takes for us to rid ourselves of the toxic sludge adults filled our cups with as children but I will fill my own damn cup from here on out

I'm having a conniption over how much I 💖💝💞🥰😻 her.

BJD Sales

Hi everyone! I will have several big expenses over the summer (wisdom tooth removal, newer car, potential ADHD and pcos evals/diagnoses, etc) and I want to make sure they are as... least-impacting as possible on my savings, especially since most are medical and I have no idea how much my insurance is acting going to cover... so any reblogs and shares are always appreciated!

Most things will be cross-posted on Den of Angels, Instagram, and Facebook. Additional information will be under the cut. I ship from the USA and due to postal concerns, I can only send the large, high-value packages within the USA right now.

Allergen warning: I live in a pet-friendly, non-smoking household near a corn mill.

Harucasting Smile Maji head: She’s some kind of tan resin, but I don’t 100% remember which one. Her previous owner split the head and body so the coa went with the body. I remember her previous owners name & email, but I don’t recall their instagram handle. Maji has thankfully NOT been recasted so I do not worry about her legitimacy, but I wanted to be upfront about that detail. Her magnets need to be reglued and she still has faceup residue. As with any of my Harucasting dolls, in respect to Haru’s wishes, I will only sell his dolls to pro-artist/anti-recast individuals.

$100 + shipping

5stardoll Elf Elaine: She was painted by her previous owner and given a mani-pedi which is chipping as well as pretty purple body shimmer. Her face still has faceup residue on it. She’s really cute but I need to make room — I am willing to sell her head separately, though. According to her card of authenticity she was produced in late 2018. I believe she is in normal pink skin.

$170 + shipping

Latidoll Blue Yern:

Yern is a slim MSD sized doll and the Blue (MSD) line has been long discontinued. Yern still has her coa and Latidoll manual, as well as the emblem in and outside of her head. I am not sure of the specifics but her torso has had some kind of mod job for mobility reasons?

Yern is from early 2009 and has certainly yellowed, but her yellowing appears to be consistent. Yern would probably benefit from a restringing with thicker elastics but I can get her to pose and stand just fine. Her s hooks were replaced and she has traditional/standard bjd s hooks in her wrists and ankles. For whatever reason one elbow likes to stay slightly bent. Yern will be shipped UNSTRUNG so that would be a good opportunity for her elastics to be changed; she still has an o hook for her head.

Her faceup is holding up really well considering it is quite old but please be aware that it is old, has some wear, and it is not factored into the price I am selling Yern at. The biggest sign of wear I noticed as a small dark streak near her temple.

She has some damage near her foot/ankle. Considering her age I think she has been holding up really well.

$100 + shipping

Dollzone MSD Girl Body: normal pink resin. Arrived from Alice collections in late 2022, spent most of its time in the box. Asking $200 + shipping.

Harucasting Big Geuru: She is in neul medium tan. She has a face up by @tonocha331. She has an extra pair of hands and comes with her box and card of authenticity. She will come without clothes or eyes.

She has some small s hook scratches in one wrist from a previous owner and several small scratches on her belly. Her face up seems to be in overall good condition other than three shiny spots on the side of her head. $550 + shipping

hey folks if you have an android phone: google shadow installed a "security app".

play.google.com

Android System SafetyCore - Apps on Google Play

Provides safety features for Android devices.

I had to go and delete it myself this morning.

couple takes tax evasion to other level!! house won’t stop MOVING!!

I could think of no better way to share the news than this!

So when I was 17, my cat went missing and I'd given up hope of ever seeing him again.

Until on Monday, 27th of May, 2024, my friend sent me a FB post asking 'isn't that your mother?' about the person named on the microchip.

Here he is! 16 years old, and found safe, twelve whole years after he went missing!

Yesterday (Tuesday the 28th of May, 2024) I went to the rescue that had him, and I reclaimed my boy, renaming him Artie! (He'd originally been called 'Cat' because my mother and I couldn't decide on a name)

He's home safe with me now, currently inhabiting my bathroom and purring up a storm every time someone goes in there!

I'll be doing slow introductions between him and my current cat to give them the best possible chance of living in harmony!

Here's some pictures of Artie once we let him out of the carrier:

Uh.. Be Goths are doing a kickstarter to bring back those freaky lil goth dolls, but they are also now offering "blank" dolls for customs! I am also happy to see they will have enhanced articulation.

(its one of the things thats kept me from searching ebay for old ones)