Sandara  -  https://society6.com/sandara  -  https://www.etsy.com/es/shop/sandara3  -  http://community.welovefine.com/profile/330243

decided to take a bunch of photos of my eye for ref

since eyes always look vastly different shapes and i dont feel like that has enough rep in art styles sometimes?

anyway if other people do this i’d love to see. have more eyes to add to my ref folder and all that

Greek/Roman Inspired Clothing:  2nd dress by Hana Touma, 3rd dress on ebay, 4th dress found here, 5th dress by Madame Gres ,6th dress by Kaufman Franco  , 7th dress by J.Mendel, 8th dress by Madame Gres, 9th dress by Jean Desses, 10th dress by Marchesa, 11th dress by 33Jewls, 12th (last) dress by Samuelle Couture

anyway here’s some river story stuff

I drew a visual hair type classification guide. I thought I’d share it here. Mine is between 1b-1c.

Eeveelution variations!

PLEASE DO NOT REPOST OR REDISTRIBUTE ON OTHER WEBSITES

Throughout the years I’ve seen so many headcanons for the eeveelutions, many of which based the Eevees off of just one animal or a mix of them so I decided to play around with some designs to encompass most of these ideas.

The main idea being that: Because Eevee’s DNA is so wacky and it can evolve into so many diverse evolutions, its species can also vary from evolution to evolution, region to region, bloodline to bloodline.

Many being domestically bred for specific traits whether it be for battling, contests, companionship, or to be put to work, many others are found that way in wild populations where little human interaction has occurred.

All of the standard Eeveelutions shown are supposed to be more or less ambiguous, not based around just one animal but instead, designed to fit their official artwork as close as possible. Basically, standards are mutts as far as what species they are is concerned, hence people calling them catfoxrabbit things. As for the variations, all bets are off and many have been bred and narrowed down to one species.

The three-to-four variation examples I drew at the top of each picture are not exclusive to which species expresses it in the examples below. These variation types whether it be coat pattern, jewels, leaves, skin type, can appear in most any strain of each respective eeveelution.

Likewise, the species variations beside the standard eeveelution are not the only available species per that pokemon as the possibilities of other species and mixes are endless. It’s even possible for your eevee to change species upon evolution, much like the quilava line already does [shrew to weasel to badger].

It took me about three days to finish this and loads of references. In the end I’m quite happy with how it all came out and I hope you all enjoy. And if you want to draw character inspiration from this post please be my guest!!

For all the photographers out there.

I've been thinking about this for a while, but how effective is full plate armour? Was it actually a good way to defend yourself?

Short Answer: Yes. 

Here’s a general rule: People in the past were ignorant about a lot of things, but they weren’t stupid. If they used something, chances are they had a good reason. There are exceptions, but plate armor is not one of them. 

Long Answer: 

For a type of armor, no matter what it is, to be considered effective, it has to meet three criteria. 

The three criteria are: Economic Efficiency, Protectiveness, and Mobility.

1. Is it Economically Efficient? 

Because of the nature of society in the Middle Ages, what with equipment being largely bring-it-yourself when it came to anybody besides arrowfodder infantry who’d been given one week of training, economic efficiency was a problem for the first couple of decades after plate armor was introduced in France in the 1360s. It wasn’t easy to make, and there wasn’t really a ‘science’ to it yet, so only the wealthiest of French soldiers, meaning knights and above, had it; unless of course somebody stole it off a dead French noble. The Hundred Years War was in full swing at the time, and the French were losing badly to the English and their powerful longbows, so there were plenty of dead French nobles and knights to go around. That plate armor was not very economically efficient for you unless you were a rich man, though, it also was not exactly what we would call “full” plate armor. 

Above: Early plate armor, like that used by knights and above during the later 1300s and early 1400s. 

Above: Two examples of what most people mean when they say “full” plate armor, which would have been seen in the mid to late 1400s and early 1500s.

Disclaimer: These are just examples. No two suits of armor were the same because they weren’t mass-produced, and there was not really a year when everybody decided to all switch to the next evolution of plate armor. In fact it would not be improbably to see all three of these suits on the same battlefield, as expensive armor was often passed down from father to son and used for many decades. 

Just like any new technology, however, as production methods improved, the product got cheaper. 

Above: The Battle of Barnet, 1471, in which everybody had plate armor because it’s affordable by then. 

So if we’re talking about the mid to late 1400s, which is when our modern image of the “knight in shining armor” sort of comes from, then yes, “full” plate armor is economically efficient. It still wasn’t cheap, but neither are modern day cars, and yet they’re everywhere. Also similar to cars, plate armor is durable enough to be passed down in families for generations, and after the Hundred Years War ended in 1453, there was a lot of used military equipment on sale for cheap. 

2. Is it Protective? 

This is a hard question to answer, particularly because no armor is perfect, and as soon as a new, seemingly ‘perfect’ type of armor appears, weapons and techniques adapt to kill the wearer anyway, and the other way around. Early plate armor was invented as a response to the extreme armor-piercing ability of the English longbow, the armor-piercing ability of a new kind of crossbow, and advancements in arrowhead technology. 

Above: The old kind of arrowhead, ineffective against most armor. 

Above: The new kind of arrowhead, very effective at piercing chainmaille and able to pierce plate armor if launched with enough power. 

Above: An arrow shot from a “short” bow with the armor-piercing tip(I think it’s called a bodkin tip) piercing a shirt of chainmaille. However, the target likely would have survived since soldiers wore protective layers of padding underneath their armor, so if the arrow penetrated skin at all, it wasn’t deep. That’s Terry Jones in the background. 

Above: A crossbow bolt with the armor piercing tip penetrating deep through the same shirt of chainmaille. The target would likely not survive. 

Above: A crossbow bolt from the same crossbow glancing off a breastplate, demonstrating that it was in fact an improvement over wearing just chainmaille. 

Unfortunately it didn’t help at all against the powerful English longbows at close range, but credit to the French for trying. It did at least help against weaker bows. 

Now for melee weapons. 

It didn’t take long for weapons to evolve to fight this new armor, but rarely was it by way of piercing through it. It was really more so that the same weapons were now being used in new ways to get around the armor. 

Above: It’s a popular myth that Medieval swords were dull, but they still couldn’t cut through plate armor, nor could they thrust through it. Your weapon would break before the armor would. Most straight swords could, however, thrust through chainmaille and anything weaker. 

There were three general answers to this problem: 

1. Be more precise, and thrust through the weak points. 

Above: The weak points of a suit of armor. Most of these points would have been covered by chainmaille, leather, thick cloth, or all three, but a sword can thrust through all three so it doesn’t matter. 

To achieve the kind of thrusting accuracy needed to penetrate these small gaps, knights would often grip the blade of their sword with one hand and keep the other hand on the grip. This technique was called “half-swording”, and you could lose a finger if you don’t do it right, so don’t try it at home unless you have a thick leather glove to protect you, as most knights did, but it can also be done bare-handed. 

Above: Examples of half-swording. 

2. Just hit the armor so fucking hard that the force carries through and potentially breaks bones underneath. 

Specialty weapons were made for this, but we’ll get to them in a minute. For now I’m still focusing on swords because I like how versatile the European longsword is. 

Above: A longsword. They’re made for two-handed use, but they’re light enough to be used effectively in one hand if you’d like to have a shield or your other arm has been injured. Longswords are typically about 75% of the height of their wielders.

Assuming you’re holding the sword pointing towards the sky, the part just above the grip is called the crossguard, and the part just below the grip is called the pommel. If you hold the sword upside-down by the blade, using the same careful gripping techniques as with half-swording, you can strike with either the crossguard or the pommel, effectively turning the sword into a warhammer. This technique was called the Murder Stroke, and direct hits could easily dent plate armor, and leave the man inside bruised, concussed, or with a broken bone. 

Above: The Murder Stroke as seen in a Medieval swordfighting manual.

Regular maces, hammers, and other blunt weapons were equally effective if you could get a hard enough hit in without leaving yourself open, but they all suffered from part of the plate armor’s intelligent design. Nearly every part of it was smooth and/or rounded, meaning that it’s very easy for blows to ‘slide’ off, which wastes a lot of their power. This makes it very hard to get a ‘direct’ hit. 

Here come the specialized weapons to save the day. 

Above: A lucerne, or claw hammer. It’s just one of the specialized weapons, but it encompasses all their shared traits so I’m going to only list it. 

These could be one-handed, two-handed, or long polearms, but the general idea was the same. Either crack bones beneath armor with the left part, or penetrate plate armor with the right part. The left part has four ‘prongs’ so that it can ‘grip’ smooth plate armor and keep its force when it hits without glancing off. On the right side it as a super sturdy ‘pick’, which is about the only thing that can penetrate the plate armor itself. On top it has a sharp tip that’s useful for fighting more lightly armored opponents. 

3. Force them to the ground and stab them through the visor with a dagger. 

This one is pretty self-explanatory. Many conflicts between two armored knights would turn into a wrestling match. Whoever could get the other on the ground had a huge advantage, and could finish his opponent, or force him to surrender, with a dagger. 

By now you might be thinking “Dang, full plate armor has a lot of weaknesses, so how can it be called good armor?” 

The answer is because, like all armor is supposed to do, it minimizes your target area. If armor is such that your enemy either needs to risk cutting their fingers to target extremely small weak points, bring a specialized weapons designed specifically for your armor, or wrestle you to the ground to defeat you, that’s some damn good armor. So yes, it will protect you pretty well.

Above: The red areas represent the weak points of a man not wearing armor.

Also, before I move on to Mobility, I’m going to talk briefly about a pet-peeve of mine: Boob-plates. 

If you’re writing a fantasy book, movie, or video game, and you want it to be realistically themed, don’t give the women boob-shaped armor. It wasn’t done historically even in the few cases when women wore plate armor, and that’s because it isn’t as protective as a smooth, rounded breastplate like you see men wearing. A hit with any weapon between the two ‘boobs’ will hit with its full force rather than glancing off, and that’ll hurt. If you’re not going for a realistic feel, then do whatever you want. Just my advice. 

Above: Joan of Arc, wearing properly protective armor. 

An exception to this is in ancient times. Female gladiators sometimes wore boob-shaped armor because that was for entertainment and nobody cared if they lived or died. Same with male gladiators. There was also armor shaped like male chests in ancient times, but because men are more flat-chested than women, this caused less of a problem. Smooth, rounded breastplates are still superior, though. 

3. Does it allow the wearer to keep his or her freedom of movement? 

Okay, I’ve been writing this for like four hours, so thankfully this is the simplest question to answer. There’s a modern myth that plate armor weighed like 700 lbs, and that knights could barely move in it at all, but that isn’t true. On a suit of plate armor from the mid to late 1400s or early 1500s, all the joints are hinged in such a way that they don’t impede your movement very much at all. 

The whole suit, including every individual plate, the chainmaille underneath the plates, the thick cloth or leather underneath the chainmaille, and your clothes and underwear all together usually weighed about 45-55 lbs, and because the weight was distributed evenly across your whole body, you’d hardly feel the weight at all. Much heavier suits of armor that did effectively ‘lock’ the wearer in place did exist, but they never saw battlefield use. Instead, they were for showing off at parades and for jousting. Jousting armor was always heavier, thicker, and more stiffly jointed than battlefield armor because the knight only needed to move certain parts of his body, plus being thrown off a horse by a lance–even a wooden one that’s not meant to kill–has a very, very high risk of injury.

Here’s a bunch of .gifs of a guy demonstrating that you can move pretty freely in plate armor. 

Above: Can you move in it? Yes.

Here are links to the videos that I made these .gifs from: 

https://www.youtube.com/watch?v=vi757-7XD94

https://www.youtube.com/watch?v=NhWFQtzM4r0

https://www.youtube.com/watch?v=5hlIUrd7d1Q

Dennis Basso pre fall 2016

NICOLAS JEBRAN Couture Fall 2013

A compilation of stuff I know about drawing Asian faces and Asian culture! I feel like many “How-To-Draw” tutorials often default to European faces and are not really helpful when drawing people of other races. So I thought I’d put this together in case anyone is interested! Feel free to share this guide and shoot me questions if you have any! I’m by no means an expert, I just know a few things from drawing experience and from my own cultural background.