Universe - Blog Posts

nasa

8 months ago

25 Years of Exploring the Universe with NASA's Chandra Xray Observatory

Illustration of the Chandra telescope in orbit around Earth. Credit: NASA/CXC & J. Vaughan

On July 23, 1999, the space shuttle Columbia launched into orbit carrying NASA’s Chandra X-ray Observatory. August 26 marked 25 years since Chandra released its first images.

These were the first of more than 25,000 observations Chandra has taken. This year, as NASA celebrates the 25th anniversary of this telescope and the incredible data it has provided, we’re taking a peek at some of its most memorable moments.

About the Spacecraft

The Chandra telescope system uses four specialized mirrors to observe X-ray emissions across the universe. X-rays that strike a “regular” mirror head on will be absorbed, so Chandra’s mirrors are shaped like barrels and precisely constructed. The rest of the spacecraft system provides the support structure and environment necessary for the telescope and the science instruments to work as an observatory. To provide motion to the observatory, Chandra has two different sets of thrusters. To control the temperatures of critical components, Chandra's thermal control system consists of a cooling radiator, insulators, heaters, and thermostats. Chandra's electrical power comes from its solar arrays.

Learn more about the spacecraft's components that were developed and tested at NASA’s Marshall Space Flight Center in Huntsville, Alabama. Fun fact: If the state of Colorado were as smooth as the surface of the Chandra X-ray Observatory mirrors, Pike's Peak would be less than an inch tall.

Engineers in the X-ray Calibration Facility at NASA’s Marshall Space Flight Center in Huntsville, Alabama, integrating the Chandra X-ray Observatory’s High-Resolution Camera with the mirror assembly, in this photo taken March 16, 1997. Credit: NASA

Launch

When space shuttle Columbia launched on July 23, 1999, Chandra was the heaviest and largest payload ever launched by the shuttle. Under the command of Col. Eileen Collins, Columbia lifted off the launch pad at NASA’s Kennedy Space Center in Florida. Chandra was deployed on the mission’s first day.

Reflected in the waters, space shuttle Columbia rockets into the night sky from Launch Pad 39-B on mission STS-93 from Kennedy Space Center. Credit: NASA

First Light Images

Just 34 days after launch, extraordinary first images from our Chandra X-ray Observatory were released. The image of supernova remnant Cassiopeia A traces the aftermath of a gigantic stellar explosion in such captivating detail that scientists can see evidence of what is likely the neutron star.

“We see the collision of the debris from the exploded star with the matter around it, we see shock waves rushing into interstellar space at millions of miles per hour,” said Harvey Tananbaum, founding Director of the Chandra X-ray Center at the Smithsonian Astrophysical Observatory.

Cassiopeia A is the remnant of a star that exploded about 300 years ago. The X-ray image shows an expanding shell of hot gas produced by the explosion colored in bright orange and yellows. Credit: NASA/CXC/SAO

A New Look at the Universe

NASA released 25 never-before-seen views to celebrate the telescopes 25th anniversary. This collection contains different types of objects in space and includes a new look at Cassiopeia A. Here the supernova remnant is seen with a quarter-century worth of Chandra observations (blue) plus recent views from NASA’s James Webb Space Telescope (grey and gold).

This image features deep data of the Cassiopeia A supernova, an expanding ball of matter and energy ejected from an exploding star in blues, greys and golds. The Cassiopeia A supernova remnant has been observed for over 2 million seconds since the start of Chandra’s mission in 1999 and has also recently been viewed by the James Webb Space Telescope. Credit: NASA/CXC/SAO

Can You Hear Me Now?

In 2020, experts at the Chandra X-ray Center/Smithsonian Astrophysical Observatory (SAO) and SYSTEM Sounds began the first ongoing, sustained effort at NASA to “sonify” (turn into sound) astronomical data. Data from NASA observatories such as Chandra, the Hubble Space Telescope, and the James Webb Space Telescope, has been translated into frequencies that can be heard by the human ear.

SAO Research shows that sonifications help many types of learners – especially those who are low-vision or blind -- engage with and enjoy astronomical data more.

Click to watch the “Listen to the Universe” documentary on NASA+ that explores our sonification work: Listen to the Universe | NASA+

An image of the striking croissant-shaped planetary nebula called the Cat’s Eye, with data from the Chandra X-ray Observatory and Hubble Space Telescope. NASA’s Data sonification from Chandra, Hubble and/or Webb telecopes allows us to hear data of cosmic objects. Credit: NASA/CXO/SAO

Celebrate With Us!

Dedicated teams of engineers, designers, test technicians, and analysts at Marshall Space Flight Center in Huntsville, Alabama, are celebrating with partners at the Chandra X-ray Center and elsewhere outside and across the agency for the 25th anniversary of the Chandra X-ray Observatory. Their hard work keeps the spacecraft flying, enabling Chandra’s ongoing studies of black holes, supernovae, dark matter, and more.

Chandra will continue its mission to deepen our understanding of the origin and evolution of the cosmos, helping all of us explore the Universe.

The Chandra Xray Observatory, the longest cargo ever carried to space aboard the space shuttle, is shown in Columbia’s payload bay. This photo of the payload bay with its doors open was taken just before Chandra was tilted upward for release and deployed on July 23, 1999. Credit: NASA

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Tags

space universe nasa astronomy telescope chandra chandra25

1K notes View Post

nasa

1 year ago

This image shows a small spacecraft on a table enclosed on all sides except the one facing the camera. The sides of the enclosure are clear while the top has two dark gray panels with a light gray frame. The backside is also gray and reflects a strip of light from the room. The spacecraft’s body is a vertical golden rectangle. Shiny black solar panels extend to either side and are much wider than the spacecraft itself. There are a few wires connected to the table, which are visible underneath it. It’s watermarked, “Credit: NASA/Sophia Roberts.”

Tiny BurstCube's Tremendous Travelogue

Meet BurstCube! This shoebox-sized satellite is designed to study the most powerful explosions in the cosmos, called gamma-ray bursts. It detects gamma rays, the highest-energy form of light.

BurstCube may be small, but it had a huge journey to get to space.

Julie Cox, a mechanical engineer at Goddard, presses aluminized tape to the BurstCube instrument in a laboratory. Julie is wearing a mask, blue lab coat, and gloves, and is holding silver tweezers in one hand. The instrument, which is sitting on a table covered in hardware and tools, has raised silver-colored metal cylinders on top of a flat plate with triangular and rectangular cutouts. A roll of tape sits on the table in the foreground. The image is watermarked with “Credit: NASA/Sophia Roberts.”

First, BurstCube was designed and built at NASA’s Goddard Space Flight Center in Greenbelt, Maryland. Here you can see Julie Cox, an early career engineer, working on BurstCube’s gamma-ray detecting instrument in the Small Satellite Lab at Goddard.

BurstCube is a type of spacecraft called a CubeSat. These tiny missions give early career engineers and scientists the chance to learn about mission development — as well as do cool science!

This image shows a woman wearing a long-sleeved blue jacket and blue gloves. Her hair is bound up in a clip. She leans over a table, filling out a form. To the right, on the same table, is a shiny box within another clear box — the BurstCube satellite in its protective case. The dim room behind the woman is full of gray beams that cast shadows against the walls. There is an old white barn door in the far wall. The image is watermarked, “Credit: NASA/Sophia Roberts.”

Then, after assembling the spacecraft, the BurstCube team took it on the road to conduct a bunch of tests to determine how it will operate in space. Here you can see another early career engineer, Kate Gasaway, working on BurstCube at NASA’s Wallops Flight Facility in Virginia.

She and other members of the team used a special facility there to map BurstCube’s magnetic field. This will help them know where the instrument is pointing when it’s in space.

Three men in long-sleeved blue jackets, blue gloves, and red hard hats stand around a thermal vacuum chamber. The chamber has a square silver base and a conical white top. The man on the left is handing a wrench to a man standing on the base of the chamber. On the right, the third man looks up at the top of the chamber. They are in a lab with a high ceiling and lots of electrical equipment. An American flag hangs from the ceiling. The image is watermarked “Credit: NASA/Sophia Roberts.”

The next stop was back at Goddard, where the team put BurstCube in a vacuum chamber. You can see engineers Franklin Robinson, Elliot Schwartz, and Colton Cohill lowering the lid here. They changed the temperature inside so it was very hot and then very cold. This mimics the conditions BurstCube will experience in space as it orbits in and out of sunlight.

A man in a long-sleeved blue jacket, khaki pants, striped socks, and blue shoes sits on a rooftop. In front of him sits a small, shiny, rectangular spacecraft on top of a black case. Bundles of cables connect to the spacecraft and snake off to the right. He’s looking up at a dusky sky, which behind him is streaked with puffy pink and purple clouds. The horizon shows a line of treetops. The image is watermarked “Credit: NASA/Sophia Roberts.”

Then, up on a Goddard rooftop, the team — including early career engineer Justin Clavette — tested BurstCube’s GPS. This so-called open-sky test helps ensure the team can locate the satellite once it’s in orbit.

A black hard-shell box containing the tiny BurstCube satellite sits on a blue economy-class airplane seat by the window. The case has a blue circular NASA sticker, as well as a yellow square sticker, and three other multicolored stickers on the upper half of the case. It is strapped into the seat by a seatbelt. Outside of the window, the wing of the plane is visible, and beyond that, a faint view of the airport. The image is watermarked “Credit: NASA/Julie Cox.”

The next big step in BurstCube’s journey was a flight to Houston! The team packed it up in a special case and took it to the airport. Of course, BurstCube got the window seat!

In this image, a figure in a checkered clean suit and blue gloves loads the BurstCube satellite into a long, gray, rectangular container on a blue table. BurstCube is a smaller rectangle, with gray sides and a shiny black top, where its solar panels rest. In the background, there’s another figure in a clean suit and gloves. There’s a slight reflection that shows this picture was taken through a window. The image is watermarked, “Credit: NASA/Lucia Tian.”

Once in Texas, the BurstCube team joined their partners at Nanoracks (part of Voyager Space) to get their tiny spacecraft ready for launch. They loaded the satellite into a rectangular frame called a deployer, along with another small satellite called SNoOPI (Signals of Opportunity P-band Investigation). The deployer is used to push spacecraft into orbit from the International Space Station.

This photograph shows a rocket launching. The bottom of the image is filled with green vegetation interspersed with blue water. The sky is blue, with white clouds visible in the distance. The rocket is in the air, about two-thirds of the way to the top, followed by a fiery tail. Directly below it, at ground level, is white and gray plume of smoke. This image is watermarked, “Credit: NASA/Glenn Benson”

From Houston, BurstCube traveled to Cape Canaveral Space Force Station in Florida, where it launched on SpaceX’s 30th commercial resupply servicing mission on March 21, 2024. BurstCube traveled to the station along with some other small satellites, science experiments, as well as a supply of fresh fruit and coffee for the astronauts.

In this photograph, the CRS-30 cargo mission is shown docking with the International Space Station. Against a black background, a white cone — the cargo mission — is attached to a cylinder with a whitish top. There are boxes in the foreground. The image is watermarked, “Credit: NASA.”

A few days later, the mission docked at the space station, and the astronauts aboard began unloading all the supplies, including BurstCube!

In this animated GIF, a boxy white tube extends at a 45-degree angle from the bottom right-hand corner. After a moment, two small, dark, rectangular objects come out of the tube. These are the BurstCube and SNoOPI CubeSats. They’re very close together initially, but as they move out of frame, they start to separate. In the background is the blue marble of Earth streaked with white clouds, as seen from the International Space Station. The image is watermarked “Credit: NASA.”

And finally, on April 18, 2024, BurstCube was released into orbit. The team will spend a month getting the satellite ready to search the skies for gamma-ray bursts. Then finally, after a long journey, this tiny satellite can embark on its big mission!

This is a photo of nine members of the BurstCube team. BurstCube is the shoebox-sized satellite sitting behind a clear case in the middle of the group. In the photo are three women and six men. Four people standing form a back row, and the remaining five kneel in front of them on a tile floor. Each wears a brightly colored protective jacket and some are attached by gray cords to the surfaces to help them avoid accumulating static electricity. On the ground in front of the team members is bright yellow caution tape. To the left of the image is additional equipment. The photo is watermarked “Credit NASA/Sophia Roberts.”

BurstCube wouldn’t be the spacecraft it is today without the input of many early career engineers and scientists. Are you interested in learning more about how you can participate in a mission like this one? There are opportunities for students in middle and high school as well as college!

Keep up on BurstCube’s journey with NASA Universe on X and Facebook. And make sure to follow us on Tumblr for your regular dose of space!

Tags

space tech universe science nasa astronomy technology jobseekers launch dream job spaceblr gamma ray bursts cubesat smallsat

663 notes View Post

nasa

1 year ago

Hot New Planetary System Just Dropped.

We hope you like your planetary systems extra spicy. 🔥

A new system of seven sizzling planets has been discovered using data from our retired Kepler space telescope.

Named Kepler-385, it’s part of a new catalog of planet candidates and multi-planet systems discovered using Kepler.

The discovery helps illustrate that multi-planetary systems have more circular orbits around the host star than systems with only one or two planets.

Our Kepler mission is responsible for the discovery of the most known exoplanets to date. The space telescope’s observations ended in 2018, but its data continues to paint a more detailed picture of our galaxy today.

Here are a few more things to know about Kepler-385:

Artist’s concept of Kepler 385, a seven-planet system with a Sun-like star to the left of the image and the planets varying in color and size are arranged in a straight line from inner-most to outer-most going from left to right. Credit: NASA/Daniel Rutter

All seven planets are between the size of Earth and Neptune.

Artist’s concept showing two of the seven planets discovered orbiting a Sun-like star. Credit: NASA/Daniel Rutter

Its star is 10% larger and 5% hotter than our Sun.

This artist concept shows NASA's planet-hunting Kepler spacecraft among the stars. The spacecraft looks like a golden cylinder with one end cut diagonally. Silver metal surrounds the cylinder, with solar panels all along one portion. Credit: NASA/ESA/CSA/STScI

This system is one of over 700 that Kepler’s data has revealed.

The planets’ orbits have been represented in sound.

Now that you’ve heard a little about this planetary system, get acquainted with more exoplanets and why we want to explore them.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space Youtube tech universe nasa kepler technology telescope exoplanets space telescope data sonification sounds of space space sounds

3K notes View Post

nasa

1 year ago

A group of people wearing white clean room suits with hoods and blue gloves work in a circle at the base of a tall, silver-and-gold structure laced with wiring. Behind them, on the right, is an eight-story white wall with blue stripes and a glass window. The left, far wall is covered in pale, square filters. Credit: NASA/Chris Gunn

The Nancy Grace Roman Space Telescope’s flight harness is transferred from the mock-up structure to the spacecraft flight structure.

Your Body is Wired Like a NASA Space Telescope. Sort Of.

If our Nancy Grace Roman Space Telescope were alive, its nervous system would be the intricate wiring, or “harness,” that helps different parts of the observatory communicate with one another. Just like the human body sends information through nerves to function, Roman will send commands through this special harness to help achieve its mission: answering longstanding questions about dark energy, dark matter, and exoplanets, among other mind-bending cosmic queries.

Roman’s harness weighs around 1,000 pounds and is made of about 32,000 wires and 900 connectors. If those parts were laid out end-to-end, they would be 45 miles long from start to finish. Coincidentally, the human body’s nerves would span the same distance if lined up. That’s far enough to reach nearly three-fourths of the way to space, twice as far as a marathon, or eight times taller than Mount Everest!

Seen from above, two individuals wearing white clean room suits with hoods and blue gloves work inside of a large, silvery metal structure with a hexagonal shape and a large cylindrical hole, covered in a diamond-patterned texture. Red and white wire bundles of cables drape across the top of the structure like strands of spaghetti. Credit: NASA/Chris Gunn

An aerial view of the harness technicians working to secure Roman’s harness to the spacecraft flight structure.

Over a span of two years, 11 technicians spent time at the workbench and perched on ladders, cutting wire to length, carefully cleaning each component, and repeatedly connecting everything together.

Space is usually freezing cold, but spacecraft that are in direct sunlight can get incredibly hot. Roman’s harness went through the Space Environment Simulator – a massive thermal vacuum chamber – to expose the components to the temperatures they’ll experience in space. Technicians “baked” vapors out of the harness to make sure they won’t cause problems later in orbit.

Seen from below, two individuals wearing white clean room suits with hoods and blue gloves work inside of a silvery cylindrical metal structure. Seven bright lights mounted to the ceiling shine down onto them. Credit: NASA/Chris Gunn

Technicians work to secure Roman’s harness to the interior of the spacecraft flight structure. They are standing in the portion of the spacecraft bus where the propellant tanks will be mounted.

The next step is for engineers to weave the harness through the flight structure in Goddard’s big clean room, a space almost perfectly free of dust and other particles. This process will be ongoing until most of the spacecraft components are assembled. The Roman Space Telescope is set to launch by May 2027.

Learn more about the exciting science this mission will investigate on X and Facebook.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space tech universe nasa astronomy engineering dark matter technology dark energy telescope Roman Space Telescope space hardware

4K notes View Post

nasa

1 year ago

In this multiwavelength image, the central object resembles a semi-transparent, spinning toy top in shades of purple and magenta against a black background. The top-like structure appears to be slightly falling toward the right side of the image. At its center is a bright spot. This is the pulsar that powers the nebula. A stream of material is spewing forth from the pulsar in a downward direction, constituting what would be the part of a top that touches a surface while it is spinning. Wispy purple light accents regions surrounding the object. This image combines data from NASA's Chandra, Hubble, and Spitzer telescopes. Credit: X-ray: NASA/CXC/SAO; Optical: NASA/STScI; Infrared: NASA-JPL-Caltech

Navigating Deep Space by Starlight

On August 6, 1967, astrophysicist Jocelyn Bell Burnell noticed a blip in her radio telescope data. And then another. Eventually, Bell Burnell figured out that these blips, or pulses, were not from people or machines.

This photograph shows astrophysicist Jocelyn Bell Burnell smiling into a camera. She is wearing glasses, a pink collared shirt, and a black cardigan. She is holding a yellow pencil above a piece of paper with a red line across it. There is a tan lampshade and several books in the background. The image is watermarked “Copyright: Robin Scagell/Galaxy Picture Library.”

The blips were constant. There was something in space that was pulsing in a regular pattern, and Bell Burnell figured out that it was a pulsar: a rapidly spinning neutron star emitting beams of light. Neutron stars are superdense objects created when a massive star dies. Not only are they dense, but neutron stars can also spin really fast! Every star we observe spins, and due to a property called angular momentum, as a collapsing star gets smaller and denser, it spins faster. It’s like how ice skaters spin faster as they bring their arms closer to their bodies and make the space that they take up smaller.

This animation depicts a distant pulsar blinking amidst a dark sky speckled with colorful stars and other objects. The pulsar is at the center of the image, glowing purple, varying in brightness and intensity in a pulsating pattern. As the camera pulls back, we see more surrounding objects, but the pulsar continues to blink. The image is watermarked “Artist’s concept.” Credit: NASA’s Goddard Space Flight Center

The pulses of light coming from these whirling stars are like the beacons spinning at the tops of lighthouses that help sailors safely approach the shore. As the pulsar spins, beams of radio waves (and other types of light) are swept out into the universe with each turn. The light appears and disappears from our view each time the star rotates.

A small neutron star spins at the center of this animation. Two purple beams of light sweep around the star-filled sky, emanating from two spots on the surface of the neutron star, and one beam crosses the viewer’s line of sight with a bright flash. The image is watermarked “Artist’s concept.” Credit: NASA's Goddard Space Flight Center.

After decades of studying pulsars, astronomers wondered—could they serve as cosmic beacons to help future space explorers navigate the universe? To see if it could work, scientists needed to do some testing!

First, it was important to gather more data. NASA’s NICER, or Neutron star Interior Composition Explorer, is a telescope that was installed aboard the International Space Station in 2017. Its goal is to find out things about neutron stars like their sizes and densities, using an array of 56 special X-ray concentrators and sensitive detectors to capture and measure pulsars’ light.

This time-lapse of our Neutron star Interior Composition Explorer (NICER) shows how it scans the skies to study pulsars and other X-ray sources from its perch aboard the International Space Station. NICER is near the center of the image, a white box mounted on a platform with a shiny panel on one side and dozens of cylindrical mirrors on the opposite side. Around it are other silver and white instruments and scaffolding. NICER swivels and pans to track objects, and some other objects nearby move as well. The station’s giant solar panels twist and turn in the background. Movement in the sequence, which represents a little more than one 90-minute orbit, is sped up by 100 times. Credit: NASA.

But how can we use these X-ray pulses as navigational tools? Enter SEXTANT, or Station Explorer for X-ray Timing and Navigation Technology. If NICER was your phone, SEXTANT would be like an app on it.

During the first few years of NICER’s observations, SEXTANT created an on-board navigation system using NICER’s pulsar data. It worked by measuring the consistent timing between each pulsar’s pulses to map a set of cosmic beacons.

This photo shows the NICER payload on the International Space Station. Against a black background, tall rectangular solar panels that appear as a golden mesh rise from the bottom of the photo, passing through its middle area. In front of that are a variety of gray and white shapes that make up instruments and the structure of the space station near NICER. Standing above from them, attached to a silver pole, is the rectangular box of the NICER telescope, which is pointing its concentrators up and to the right. Credit: NASA.

When calculating position or location, extremely accurate timekeeping is essential. We usually rely on atomic clocks, which use the predictable fluctuations of atoms to tick away the seconds. These atomic clocks can be located on the ground or in space, like the ones on GPS satellites. However, our GPS system only works on or close to Earth, and onboard atomic clocks can be expensive and heavy. Using pulsar observations instead could give us free and reliable “clocks” for navigation. During its experiment, SEXTANT was able to successfully determine the space station’s orbital position!

A photo of the International Space Station as seen from above. The left and right sides of the image are framed by the station's long, rectangular solar panels, with a complex array of modules and hardware in the middle. The background is taken up fully by the surface of the Earth; lakes, snow-capped mountains, and a large body of water are faintly visible beneath white clouds. Credit: NASA

We can calculate distances using the time taken for a signal to travel between two objects to determine a spacecraft’s approximate location relative to those objects. However, we would need to observe more pulsars to pinpoint a more exact location of a spacecraft. As SEXTANT gathered signals from multiple pulsars, it could more accurately derive its position in space.

This animation shows how triangulating the distances to multiple pulsars could help future space explorers determine their location. In the first sequence, the location of a spaceship is shown in a blue circle in the center of the image against a dark space background. Three pulsars, shown as spinning beams of light, appear around the location. They are circled in green and then connected with dotted lines. Text on screen reads “NICER data are also used in SEXTANT, an on-board demonstration of pulsar-based navigation.” The view switches to the inside of a futuristic spacecraft, looking through the windshield at the pulsars. An illuminated control panel glows in blues and purples. On-screen text reads “This GPS-like technology may revolutionize deep space navigation through the solar system and beyond.” Credit: NASA’s Johnson Space Center

So, imagine you are an astronaut on a lengthy journey to the outer solar system. You could use the technology developed by SEXTANT to help plot your course. Since pulsars are reliable and consistent in their spins, you wouldn’t need Wi-Fi or cell service to figure out where you were in relation to your destination. The pulsar-based navigation data could even help you figure out your ETA!

NASA’s Space Launch System (SLS) rocket carrying the Orion spacecraft launched on the Artemis I flight test. With Artemis I, NASA sets the stage for human exploration into deep space, where astronauts will build and begin testing the systems near the Moon needed for lunar surface missions and exploration to other destinations farther from Earth. This image shows a SLS rocket against a dark, evening sky and clouds of smoke coming out from the launch pad. This is all reflected on the water in the foreground of the photo. Credit: NASA/Bill Ingalls

None of these missions or experiments would be possible without Jocelyn Bell Burnell’s keen eye for an odd spot in her radio data decades ago, which set the stage for the idea to use spinning neutron stars as a celestial GPS. Her contribution to the field of astrophysics laid the groundwork for research benefitting the people of the future, who yearn to sail amongst the stars.

Keep up with the latest NICER news by following NASA Universe on X and Facebook and check out the mission’s website. For more on space navigation, follow @NASASCaN on X or visit NASA’s Space Communications and Navigation website.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space star universe deep space science nasa astronomy navigation telescope spaceblr pulsar Jocelyn Bell Burnell neutron star

3K notes View Post

nasa

1 year ago

The James Webb Space Telescope has just completed a successful first year of science. Let’s celebrate by seeing the birth of Sun-like stars in this brand-new image from the Webb telescope!

This is a small star-forming region in the Rho Ophiuchi cloud complex. At 390 light-years away, it's the closest star-forming region to Earth. There are around 50 young stars here, all of them similar in mass to the Sun, or smaller. The darkest areas are the densest, where thick dust cocoons still-forming protostars. Huge red bipolar jets of molecular hydrogen dominate the image, appearing horizontally across the upper third and vertically on the right. These occur when a star first bursts through its natal envelope of cosmic dust, shooting out a pair of opposing jets into space like a newborn first stretching her arms out into the world. In contrast, the star S1 has carved out a glowing cave of dust in the lower half of the image. It is the only star in the image that is significantly more massive than the Sun.

Thanks to Webb’s sensitive instruments, we get to witness moments like this at the beginning of a star’s life. One year in, Webb’s science mission is only just getting started. The second year of observations has already been selected, with plans to build on an exciting first year that exceeded expectations. Here’s to many more years of scientific discovery with Webb.

Make sure to follow us on Tumblr for your regular dose of space!

Credits: NASA, ESA, CSA, STScI, Klaus Pontoppidan (STScI)

Tags

space universe nasa astronomy astrophotography webb JWST james webb space telescope csa è¶Šå— spaceblr Unfold the Universe

11K notes View Post

nasa

1 year ago

The background is mostly dark. At the center is a dark orange-brownish circle, surrounded by several blazing bright, thick, horizontal whiteish rings. This is Saturn and its rings. There are three tiny organ-like dots in the image—one to the upper left of the planet, one to the direct left of the planet, and the lower left of the planet. These are some of Saturn’s moons: Dione, Enceladus, and Tethys, respectively. There is a slightly darker tint at the northern and southern poles of the planet. The rings surrounding Saturn are mostly broad, with a few singular narrow gaps between the broader rings. The innermost, darkest band is the C ring. Next to that is the brighter, wider B ring. Traveling farther outward, a small dark gap, the Cassini division creates a space before another thicker ring called the A ring. Credits: NASA, ESA, CSA, STScI, M. Tiscareno (SETI Institute), M. Hedman (University of Idaho), M. El Moutamid (Cornell University), M. Showalter (SETI Institute), L. Fletcher (University of Leicester), H. Hammel (AURA); image processing by J. DePasquale (STScI)

Of course Saturn brought its ring light.

On June 25, 2023, our James Webb Space Telescope made its first near-infrared observations of Saturn. The planet itself appears extremely dark at this infrared wavelength, since methane gas absorbs almost all the sunlight falling on the atmosphere. The icy rings, however, stay relatively bright, leading to Saturn’s unusual appearance in this image.

This new image of Saturn clearly shows details within the planet’s ring system, several of the planet’s moons (Dione, Enceladus, and Tethys), and even Saturn’s atmosphere in surprising and unexpected detail.

These observations from Webb are just a hint at what this observatory will add to Saturn’s story in the coming years as the science team delves deep into the data to prepare peer-reviewed results.

Download the full-resolution image, both labeled and unlabeled, from the Space Telescope Science Institute.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space universe planets nasa saturn... glow astroblr planet JWST james webb space telescope spaceblr

6K notes View Post

nasa

2 years ago

Meet the Four Artemis Astronauts Who Will Fly Around the Moon

The Artemis II crew sits for an official portrait in front of a dark background. They wear orange suits with various patches noting their names, nationalities, and NASA or CSA. From left to right, are NASA astronauts Christina Koch, Victor Glover (top), and Reid Wiseman (bottom), and Canadian Space Agency astronaut Jeremy Hansen. Koch holds a helmet in her hand. Credit: NASA

Today, we revealed the four astronauts who will fly around the Moon during the Artemis II mission, scheduled to launch in 2024. Get to know them:

Christina Koch

NASA astronaut Christina Hammock Koch poses for a portrait in her orange Artemis flight suit. The suit has blue trim around the neck and shoulders, with three patches: one with the U.S. flag on her left shoulder, one with her name and a pair of wings on her chest, and one with the NASA “meatball” insignia faintly visible beneath the second. The background is dark, and the photo is lit to focus on Koch’s face, which is facing the camera with a dignified expression. Credit: NASA

Meet the first member of our Artemis II crew: mission specialist Christina Koch. Koch visited the International Space Station in 2019, where she participated in the first all-woman spacewalk with Jessica Meir. She began her NASA career as an electrical engineer at Goddard Space Flight Center.

Jeremy Hansen

Representing the Canadian Space Agency is Jeremy Hansen from London, Ontario. Col. Hansen was a fighter pilot with Canadian Armed Forces before joining the Canadian Space Agency, and currently works with NASA on astronaut training and mission operations. This will be Col. Hansen’s first mission in space.

Victor Glover

Victor Glover is our Artemis II pilot. Glover is part of our 2013 class of NASA astronauts and was the pilot for NASA’s SpaceX Crew-1 mission. He’s logged 3,000 flight hours in more than 40 different aircraft.

Reid Wiseman

...and rounding out our Artemis II crew: mission commander Reid Wiseman. Wiseman lived and worked aboard the International Space Station as a flight engineer in 2014. He also commanded the undersea research mission NEEMO21, and most recently served as Chief of the NASA astronauts.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space tech moon universe artemis Space station nasa orion astronauts technology spaceblr BlackExcellence365 Lunar Mission Mega Moon Rocket

6K notes View Post

nasa

2 years ago

Sakura to Supernova

A prominent, eight-pointed star shines in bright white at the center of this image. A clumpy cloud of material surrounds this central star, with more material above and below than on the sides, in some places allowing background stars to peek through. The cloud material is a dark yellow closer to the star and turns a pinkish purple at its outer edges. Combined together, the central star and its cloud resemble the delicate petals of a cherry blossom. The black background features many smaller white stars scattered throughout.

This rare sight is a super-bright, massive Wolf-Rayet star. Calling forth the ephemeral nature of cherry blossoms, the Wolf-Rayet phase is a fleeting stage that only some stars go through soon before they explode.

The star, WR 124, is 15,000 light-years away in the constellation Sagittarius. It is 30 times the mass of the Sun and has shed 10 Suns worth of material – so far. As the ejected gas moves away from the star and cools, cosmic dust forms and glows in the infrared light detectable by NASA's James Webb Space Telescope.

The origin of cosmic dust that can survive a supernova blast is of great interest to astronomers for multiple reasons. Dust shelters forming stars, gathers together to help form planets, and serves as a platform for molecules to form and clump together, including the building blocks of life on Earth.

Stars like WR 124 also help astronomers understand the early history of the universe. Similar dying stars first seeded the young universe with heavy elements forged in their cores – elements that are now common in the current era, including on Earth.

The James Webb Space Telescope opens up new possibilities for studying details in cosmic dust, which is best observed in infrared wavelengths of light. Webb’s Near-Infrared Camera balances the brightness of WR 124’s stellar core and the knotty details in the fainter surrounding gas. The telescope’s Mid-Infrared Instrument reveals the clumpy structure of the gas and dust nebula of the ejected material now surrounding the star.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space star universe photography nasa astronomy astrophotography webb JWST spacecore SXSW

4K notes View Post

nasa

2 years ago

Time for some Sun salutations 🧘

Flow through 133 days of the Sun's activity from Aug. 12 to Dec. 22, 2022, as captured by our Solar Dynamics Observatory. From its orbit around Earth, SDO has steadily imaged the Sun in 4K resolution for nearly 13 years.

Video description: Mellow music plays as compiled images taken every 108 seconds condenses 133 days of solar observations into an hour-long video. The video shows bright active regions passing across the face of the Sun as it rotates.

Credit: NASA's Goddard Space Flight Center, Scott Wiessinger (Lead Producer and editor), Tom Bridgman (Lead Visualizer), Lars Leonhard (music)

Tags

space Youtube sun universe studyblr nasa lofi SolarSystem SolarPower

684 notes View Post

nasa

2 years ago

12 Great Gifts from Astronomy

This is a season where our thoughts turn to others and many exchange gifts with friends and family. For astronomers, our universe is the gift that keeps on giving. We’ve learned so much about it, but every question we answer leads to new things we want to know. Stars, galaxies, planets, black holes … there are endless wonders to study.

In honor of this time of year, let’s count our way through some of our favorite gifts from astronomy.

Our first astronomical gift is … one planet Earth

So far, there is only one planet that we’ve found that has everything needed to support life as we know it — Earth. Even though we’ve discovered over 5,200 planets outside our solar system, none are quite like home. But the search continues with the help of missions like our Transiting Exoplanet Survey Satellite (TESS). And even you (yes, you!) can help in the search with citizen science programs like Planet Hunters TESS and Backyard Worlds.

This animated visualization depicts Earth rotating in front of a black background. Land in shades of tan and green lay among vast blue oceans, with white clouds swirling in the atmosphere. The image is watermarked with the text “Credit: NASA/Goddard Space Flight Center Scientific Visualization Studio” and “visualization.”

Our second astronomical gift is … two giant bubbles

Astronomers found out that our Milky Way galaxy is blowing bubbles — two of them! Each bubble is about 25,000 light-years tall and glows in gamma rays. Scientists using data from our Fermi Gamma-ray Space Telescope discovered these structures in 2010, and we're still learning about them.

This image captures the majestic “Fermi bubbles” that extend above and below our Milky Way galaxy, set against the black background of space. A glowing blue line horizontally crosses the center of the image, showing our perspective from Earth of our galaxy’s spiral arms and the wispy clouds of material above and below it. Cloudy bubbles, colored deep magenta to represent Fermi’s gamma-ray vision, extend above and below the galactic plane. These bubbles are enormous, extending roughly half of the Milky Way's diameter and filling much of the top and bottom of the image. The image is watermarked “Credit: NASA/DOE/Fermi LAT Collaboration.”

Our third astronomical gift is … three types of black holes

Most black holes fit into two size categories: stellar-mass goes up to hundreds of Suns, and supermassive starts at hundreds of thousands of Suns. But what happens between those two? Where are the midsize ones? With the help of NASA’s Hubble Space Telescope, scientists found the best evidence yet for that third, in between type that we call intermediate-mass black holes. The masses of these black holes should range from around a hundred to hundreds of thousands of times the Sun’s mass. The hunt continues for these elusive black holes.

This cartoon depicts two black holes as birds, with a small one representing a stellar-mass black hole on the left and an enormous one representing a supermassive black hole on the right. These two birds appear on a tan background and flap their wings, and then a circle with three question marks pops up between them to represent the intermediate-mass black holes that scientists are hunting for. The image is watermarked “Credit: NASA’s Goddard Space Flight Center.”

Our fourth and fifth astronomical gifts are … Stephan’s Quintet

When looking at this stunning image of Stephan’s Quintet from our James Webb Space Telescope, it seems like five galaxies are hanging around one another — but did you know that one of the galaxies is much closer than the others? Four of the five galaxies are hanging out together about 290 million light-years away, but the fifth and leftmost galaxy in the image below — called NGC 7320 — is actually closer to Earth at just 40 million light-years away.

$A group of five galaxies that appear close to each other in the sky: two in the middle, one toward the top, one to the upper left, and one toward the bottom. Four of the five appear to be touching. One is somewhat separated. In the image, the galaxies are large relative to the hundreds of much smaller (more distant) galaxies in the background. All five galaxies have bright white cores. Each has a slightly different size, shape, structure, and coloring. Scattered across the image, in front of the galaxies are a number of foreground stars with diffraction spikes: bright white points, each with eight bright lines radiating out from the center. The image is watermarked with the text “Credits: NASA, ESA, CSA, and STScI.”$

Our sixth astronomical gift is … an eclipsing six-star system

Astronomers found a six-star system where all of the stars undergo eclipses, using data from our TESS mission, a supercomputer, and automated eclipse-identifying software. The system, called TYC 7037-89-1, is located 1,900 light-years away in the constellation Eridanus and the first of its kind we’ve found.

This diagram shows the sextuple star system TYC 7037-89-1, a group of six stars that interact with each other in complex orbits. The stars are arranged in pairs: System A, System B, and System C, each of which is shown as having one larger white star and one smaller yellow star. The two stars of System A, in the upper left, are connected by a red oval and labeled "1.3-day orbit." The two stars of System C, just below System A, are connected by a turquoise oval and labeled "1.6-day orbit." Additionally, these two systems orbit each other, shown as a larger blue oval connecting the two and labeled "A and C orbit every 4 years." On the other side of the image, in the bottom right, the two stars of System B are connected by a green oval and labeled "8.2-day orbit." Lastly, Systems A, B and C all interact with System B orbiting the combined A-C system, shown as a very large lilac oval labeled "AC and B orbit every 2,000 years." A caption at the bottom of the image notes, "Star sizes are to scale, orbits are not." The image is watermarked with the text “Illustration” and “Credit: NASA's Goddard Space Flight Center.”

Our seventh astronomical gift is … seven Earth-sized planets

In 2017, our now-retired Spitzer Space Telescope helped find seven Earth-size planets around TRAPPIST-1. It remains the largest batch of Earth-size worlds found around a single star and the most rocky planets found in one star’s habitable zone, the range of distances where conditions may be just right to allow the presence of liquid water on a planet’s surface.

Further research has helped us understand the planets’ densities, atmospheres, and more!

his animated image shows an artist's concept of the star TRAPPIST-1, an ultra-cool dwarf, and the seven Earth-size planets orbiting it. TRAPPIST-1 is large and glows bright orange, while the planets are smaller and in shades of cool gray-blue. The image is highly stylized to look like glowing balls sitting on a shiny surface, and neither the sizes nor distances are to scale. The planets closer to TRAPPIST-1 have droplets of water standing on the surface around them, indicating that they may have liquid water. Planets further away have frost around them, indicating that those are more likely to have significant amounts of ice, especially on the side that faces away from the star. Our view pans across the system, from the center outward, and faint tan rings depict the orbits of each planet. The image is watermarked with the text “Illustration” and “Credit: NASA/JPL-Caltech/R. Hurt (IPAC).”

Our eighth astronomical gift is … an (almost) eight-foot mirror

The primary mirror on our Nancy Grace Roman Space Telescope is approximately eight feet in diameter, similar to our Hubble Space Telescope. But Roman can survey large regions of the sky over 1,000 times faster, allowing it to hunt for thousands of exoplanets and measure light from a billion galaxies.

Our ninth astronomical gift is … a kilonova nine days later

In 2017, the National Science Foundation (NSF)’s Laser Interferometer Gravitational-Wave Observatory (LIGO) and European Gravitational Observatory’s Virgo detected gravitational waves from a pair of colliding neutron stars. Less than two seconds later, our telescopes detected a burst of gamma rays from the same event. It was the first time light and gravitational waves were seen from the same cosmic source. But then nine days later, astronomers saw X-ray light produced in jets in the collision’s aftermath. This later emission is called a kilonova, and it helped astronomers understand what the slower-moving material is made of.

This animated illustration shows what happened in the nine days following a neutron star merger known as GW170817, detected on Aug. 17, 2017. In the first part of the animation, a pair of glowing blue neutron stars spiral quickly towards each other and merge with a bright flash. The merger creates gravitational waves (shown as pale arcs rippling out from the center), a near-light-speed jet that produced gamma rays (shown as brown cones and a rapidly-traveling magenta glow erupting from the center of the collision), and a donut-shaped ring of expanding blue debris around the center of the explosion. A variety of colors represent the many wavelengths of light produced by the kilonova, creating violet to blue-white to red bursts at the top and bottom of the collision. In the second part of the animation, we see the collision as it would appear from Earth, looking like a burst of red light in the lower left and a huge umbrella-shaped cascade of blue light in the upper right, representing X-rays. The image is watermarked with the text “Credit: NASA's Goddard Space Flight Center/CI Lab” and “Illustration.”

Our tenth astronomical gift is … NuSTAR’s ten-meter-long mast

Our NuSTAR X-ray observatory is the first space telescope able to focus on high-energy X-rays. Its ten-meter-long (33 foot) mast, which deployed shortly after launch, puts NuSTAR’s detectors at the perfect distance from its reflective optics to focus X-rays. NuSTAR recently celebrated 10 years since its launch in 2012.

This animation shows an artist’s concept of the NuSTAR X-ray observatory orbiting above the blue marble of Earth and deploying its 10-meter-long (33 foot) mast shortly after launch in 2012. NuSTAR is roughly cylindrical, with a shiny silver covering and a pair of blue solar panels on each of its sides. As we pan around the spacecraft, silver scaffolding extends from inside, separating the ends of the telescope to the right distance to begin observing the universe in X-rays. The image is watermarked with the text “Illustration” and “Credit: Credit: NASA/JPL-Caltech.”

Our eleventh astronomical gift is … eleven days of observations

How long did our Hubble Space Telescope stare at a seemingly empty patch of sky to discover it was full of thousands of faint galaxies? More than 11 days of observations came together to capture this amazing image — that’s about 1 million seconds spread over 400 orbits around Earth!

This animated image zooms into the Hubble Ultra Deep Field, showing how a tiny patch of “empty” sky turned out to contain about 10,000 galaxies. The sequence begins with a starry backdrop, then we begin to zoom into the center of this image. As we travel, larger and brighter objects come into view, including dazzling spiral and elliptical galaxies in reds, oranges, blues, and purples. The image is watermarked with the text “Credit: NASA, G. Bacon and Z. Levay (STScI).”

Our twelfth astronomical gift is … a twelve-kilometer radius

Pulsars are collapsed stellar cores that pack the mass of our Sun into a whirling city-sized ball, compressing matter to its limits. Our NICER telescope aboard the International Space Station helped us precisely measure one called J0030 and found it had a radius of about twelve kilometers — roughly the size of Chicago! This discovery has expanded our understanding of pulsars with the most precise and reliable size measurements of any to date.

In this simulation of a pulsar’s magnetic fields, dozens of thin lines dance around a central gray sphere, which is the collapsed core of a dead massive star. Some of these lines, colored orange, form loops on the surface of the sphere. Others, colored blue, arc away from two spots on the lower half of the sphere and vanish into the black background. The image is watermarked with the text “Simulation” and “Credit: NASA's Goddard Space Flight Center.”

Stay tuned to NASA Universe on Twitter and Facebook to keep up with what’s going on in the cosmos every day. You can learn more about the universe here.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space stars universe gravity science nasa galaxies astronomy astrophysics international space station hubble space telescope cosmos james webb space telescope black holes spaceblr exoplanets

1K notes View Post

nasa

2 years ago

Say Hello to NGC 6441

A crowded cluster of over a million stars packs together at the center of this image of the star cluster NGC 6441. These stars shine in white, red, blue, and yellowish hues, and grow more sporadic at the image’s edges, all glittering against a black backdrop of space. Credit: ESA/Hubble & NASA, G. Piotto

Location: In the Scorpius constellation

Distance from Earth: About 44,000 light-years

Object type: Globular star cluster

Discovered by: James Dunlop in 1826

Each tiny point of light in this image is its own star - and there are more than a million of them! This stunning image captured by the Hubble Telescope depicts NGC 6441, a globular cluster that weighs about 1.6 million times the mass of our Sun. Globular clusters like NGC 6441 are groups of old stars held together by their mutual gravitational attraction, appearing nearly spherical in shape due to the density of stars that comprises them. This particular cluster is one of the most massive and luminous in our Milky Way Galaxy. It is also home to a planetary nebula and four pulsars (rotating neutron stars that emit beams of radiation at steady intervals, detected when the beams are aimed at Earth).

Read more information about NGC 6441 here.

Right now, the Hubble Space Telescope is delving into its #StarrySights campaign! Find more star cluster content and spectacular new images by following along on Hubble’s Twitter, Facebook, and Instagram.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space stars universe science nasa astronomy cosmos telescope Hubble

2K notes View Post

nasa

2 years ago

A Laboratory for Star Formation

Alt text: In this image of NGC 3603, a bright cluster of stars shining in red, orange, and yellow hues dominates the center. The stars become more sporadic throughout the rest of the image, glittering against a black backdrop of space and nebulous indigo clouds that glow in the picture’s lower half.

Credit: NASA, ESA, R. O'Connell (University of Virginia), F. Paresce (National Institute for Astrophysics, Bologna, Italy), E. Young (Universities Space Research Association/Ames Research Center), the WFC3 Science Oversight Committee, and the Hubble Heritage Team (STScI/AURA)

Location: In the Carina spiral arm of our Milky Way Galaxy

Distance from Earth: About 20,000 light-years

Object type: Nebula and open star cluster

Discovered by: Sir John Herschel in 1834

Imaged here by the Hubble Space Telescope, NGC 3603 is a collection of thousands of large, hot stars, including some of the most massive stars known to us. Scientists categorize it as an “open cluster” because of its spread-out shape and low density of stars. Surrounding the bright star cluster are plumes of interstellar gas and dust, which comprise the nebula part of this cosmic object. New stars are formed from the gaseous material within these clouds! NGC 3603 holds stars at a variety of life stages, making it a laboratory for scientists to study star evolution and formation. Astronomers estimate that star formation in and around the cluster has been occurring for 10 to 20 million years.

Read more information about NGC 3603 here.

Right now, the Hubble Space Telescope is delving into its #StarrySights campaign! Find more star cluster content and breathtaking new images by following along on Hubble’s Twitter, Facebook, and Instagram.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space stars universe science nasa astronomy cosmos telescope Hubble spaceblr

1K notes View Post

nasa

2 years ago

A Dusty Fingerprint in Space

An image from NASA’s James Webb Space Telescope shows a bright dot at the center of star-filled black space. The bright dot is actually two stars meeting, as their orbits bring them together every 8 years. The stellar pair are surrounded by 17 rings of gas and dust that appear orangish gray. The rings have a slight rectangular shape and are very clear and defined starting at about 1 o’clock on a clockface. The rings start to break up a bit to our view traveling clockwise around the image. As you arrive at the 12:40 position, only parts of about six rings can be seen as they disappear from view.

A new image from NASA's James Webb Space Telescope reveals a remarkable cosmic sight: at least 17 concentric dust rings emanating from a pair of stars. Just 5,300 light-years from Earth, the star duo are collectively known as Wolf-Rayet 140. Each ring was created when the two stars came close together and their stellar winds (streams of gas they blow into space) collided so forcefully that some of the gas was compressed into dust. The stars' orbits bring them together about once every eight years, and forms a half-shell of dust that looks like a ring from our perspective. Like a cosmic fingerprint, the 17 rings reveal more than a century of stellar interactions—and the "fingerprint" belonging to Wolf-Rayet 140 may be equally unique. Other Wolf-Rayet stars produce dust, but no other pair are known to produce rings quite like Wolf-Rayet 140.

Learn more about Wolf-Rayet 140.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

stars universe nasa astronomy telescope spaceblr Webb Telescope

14K notes View Post

nasa

2 years ago

Why Do X-Ray Mirrors Look So Unusual?

Completed quadrant of an X-ray Mirror Assembly, under development for the JAXA/NASA XRISM mission. It is shaped like a fan with thin metal struts holding it together.

Does the object in this image look like a mirror? Maybe not, but that’s exactly what it is! To be more precise, it’s a set of mirrors that will be used on an X-ray telescope. But why does it look nothing like the mirrors you’re familiar with? To answer that, let’s first take a step back. Let’s talk telescopes.

How does a telescope work?

The basic function of a telescope is to gather and focus light to amplify the light’s source. Astronomers have used telescopes for centuries, and there are a few different designs. Today, most telescopes use curved mirrors that magnify and focus light from distant objects onto your eye, a camera, or some other instrument. The mirrors can be made from a variety of materials, including glass or metal.

Diagram showing a reflecting telescope with a pair of mirrors to focus the light on the detector — in this case, an observer’s eye. The diagram shows the “flow” of light, which starts at a distant galaxy, enters the telescope and bounces off the primary mirror at the bottom of the telescope. Then the light moves to the secondary mirror which redirects the light out of the side of the telescope tube into the observer’s eye.

Space telescopes like the James Webb and Hubble Space Telescopes use large mirrors to focus light from some of the most distant objects in the sky. However, the mirrors must be tailored for the type and range of light the telescope is going to capture—and X-rays are especially hard to catch.

X-rays versus mirrors

X-rays tend to zip through most things. This is because X-rays have much smaller wavelengths than most other types of light. In fact, X-rays can be smaller than a single atom of almost every element. When an X-ray encounters some surfaces, it can pass right between the atoms!

X-ray image of a human elbow. Denser materials, like bone, stop more X-rays than skin and muscle.

Doctors use this property of X-rays to take pictures of what’s inside you. They use a beam of X-rays that mostly passes through skin and muscle but is largely blocked by denser materials, like bone. The shadow of what was blocked shows up on the film.

This tendency to pass through things includes most mirrors. If you shoot a beam of X-rays into a standard telescope, most of the light would go right through or be absorbed. The X-rays wouldn’t be focused by the mirror, and we wouldn’t be able to study them.

Animation first showing a plane of balls face-on and an arrow passing through the space between the balls. Then the angle changes to show the balls edge-on and an arrow bouncing off the top.

X-rays can bounce off a specially designed mirror, one turned on its side so that the incoming X-rays arrive almost parallel to the surface and glance off it. At this shallow angle, the space between atoms in the mirror's surface shrinks so much that X-rays can't sneak through. The light bounces off the mirror like a stone skipping on water. This type of mirror is called a grazing incidence mirror.

A metallic onion

Telescope mirrors curve so that all of the incoming light comes to the same place. Mirrors for most telescopes are based on the same 3D shape — a paraboloid. You might remember the parabola from your math classes as the cup-shaped curve. A paraboloid is a 3D version of that, spinning it around the axis, a little like the nose cone of a rocket. This turns out to be a great shape for focusing light at a point.

A line drawing of a parabola - a cup-shaped curve, shown here on its side - spins around to create a 3D shape. The word “paraboloid” shows on the screen. Then part of the curve fades away, leaving behind two things: a small concave circle, which was one end of the paraboloid, labeled “Radio dishes; optical, infrared and ultraviolet telescope mirrors,” and a cylinder with sloping walls, which was the part of the edges of the paraboloid, labeled “X-ray mirrors.”

Mirrors for visible and infrared light and dishes for radio light use the “cup” portion of that paraboloid. For X-ray astronomy, we cut it a little differently to use the wall. Same shape, different piece. The mirrors for visible, infrared, ultraviolet, and radio telescopes look like a gently-curving cup. The X-ray mirror looks like a cylinder with very slightly angled walls.

The image below shows how different the mirrors look. On the left is one of the Chandra X-ray Observatory’s cylindrical mirrors. On the right you can see the gently curved round primary mirror for the Stratospheric Observatory for Infrared Astronomy telescope.

On the left, a technician stands next to a cylinder-shaped mirror designed for X-ray astronomy. The mirror is held in a frame a little off the ground, and is about as tall as the technician. On the right, two technicians inspect a round mirror for optical astronomy.

If we use just one grazing incidence mirror in an X-ray telescope, there would be a big hole, as shown above (left). We’d miss a lot of X-rays! Instead, our mirror makers fill in that cylinder with layers and layers of mirrors, like an onion. Then we can collect more of the X-rays that enter the telescope, giving us more light to study.

Completed X-ray Mirror Assembly for the X-ray Imaging and Spectroscopy Mission (XRISM, pronounced “crism”), which is a collaboration between the Japan Aerospace Exploration Agency (JAXA) and NASA, along with ESA participation. The assembly has thin metal struts fanning outward from a silver ring in the center of the image. Shiny ridge surfaces (actually many thin mirrors!) fill in the spaces between the struts.

Nested mirrors like this have been used in many X-ray telescopes. Above is a close-up of the mirrors for an upcoming observatory called the X-ray Imaging and Spectroscopy Mission (XRISM, pronounced “crism”), which is a Japan Aerospace Exploration Agency (JAXA)-led international collaboration between JAXA, NASA, and the European Space Agency (ESA).

The XRISM mirror assembly uses thin, gold-coated mirrors to make them super reflective to X-rays. Each of the two assemblies has 1,624 of these layers packed in them. And each layer is so smooth that the roughest spots rise no more than one millionth of a millimeter.

Chandra observations of the Perseus galaxy cluster showing turbulence in the hot X-ray-emitting gas.

Why go to all this trouble to collect this elusive light? X-rays are a great way to study the hottest and most energetic areas of the universe! For example, at the centers of certain galaxies, there are black holes that heat up gas, producing all kinds of light. The X-rays can show us light emitted by material just before it falls in.

Stay tuned to NASA Universe on Twitter and Facebook to keep up with the latest on XRISM and other X-ray observatories.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space tech universe nasa astronomy astrophysics technology x ray telescope spaceblr chandra XRISM x-ray vision

1K notes View Post

nasa

2 years ago

See the Universe in a New Way with the Webb Space Telescope's First Images

Are you ready to see unprecedented, detailed views of the universe from the James Webb Space Telescope, the largest and most powerful space observatory ever made? Scroll down to see the first full-color images and data from Webb. Unfold the universe with us. ✨

Carina Nebula

See The Universe In A New Way With The Webb Space Telescope's First Images

This landscape of “mountains” and “valleys” speckled with glittering stars, called the Cosmic Cliffs, is the edge of the star-birthing Carina Nebula. Usually, the early phases of star formation are difficult to capture, but Webb can peer through cosmic dust—thanks to its extreme sensitivity, spatial resolution, and imaging capability. Protostellar jets clearly shoot out from some of these young stars in this new image.

Southern Ring Nebula

The Southern Ring Nebula is a planetary nebula: it’s an expanding cloud of gas and dust surrounding a dying star. In this new image, the nebula’s second, dimmer star is brought into full view, as well as the gas and dust it’s throwing out around it. (The brighter star is in its own stage of stellar evolution and will probably eject its own planetary nebula in the future.) These kinds of details will help us better understand how stars evolve and transform their environments. Finally, you might notice points of light in the background. Those aren’t stars—they’re distant galaxies.

Stephan’s Quintet

Stephan’s Quintet, a visual grouping of five galaxies near each other, was discovered in 1877 and is best known for being prominently featured in the holiday classic, “It’s a Wonderful Life.” This new image brings the galaxy group from the silver screen to your screen in an enormous mosaic that is Webb’s largest image to date. The mosaic covers about one-fifth of the Moon’s diameter; it contains over 150 million pixels and is constructed from almost 1,000 separate image files. Never-before-seen details are on display: sparkling clusters of millions of young stars, fresh star births, sweeping tails of gas, dust and stars, and huge shock waves paint a dramatic picture of galactic interactions.

WASP-96 b

WASP-96 b is a giant, mostly gas planet outside our solar system, discovered in 2014. Webb’s Near-Infrared Imager and Slitless Spectrograph (NIRISS) measured light from the WASP-96 system as the planet moved across the star. The light curve confirmed previous observations, but the transmission spectrum revealed new properties of the planet: an unambiguous signature of water, indications of haze, and evidence of clouds in the atmosphere. This discovery marks a giant leap forward in the quest to find potentially habitable planets beyond Earth.

Webb's First Deep Field

This image of galaxy cluster SMACS 0723, known as Webb’s First Deep Field, looks 4.6 billion years into the past. Looking at infrared wavelengths beyond Hubble’s deepest fields, Webb’s sharp near-infrared view reveals thousands of galaxies—including the faintest objects ever observed in the infrared—in the most detailed view of the early universe to date. We can now see tiny, faint structures we’ve never seen before, like star clusters and diffuse features and soon, we’ll begin to learn more about the galaxies’ masses, ages, histories, and compositions.

These images and data are just the beginning of what the observatory will find. It will study every phase in the history of our Universe, ranging from the first luminous glows after the Big Bang, to the formation of solar systems capable of supporting life on planets like Earth, to the evolution of our own Solar System.

Make sure to follow us on Tumblr for your regular dose of space—and for milestones like this!

Credits: NASA, ESA, CSA, and STScI

Tags

space universe nasa astronomy astrophotography webb JWST james webb space telescope csa è¶Šå— spaceblr Unfold the Universe

29K notes View Post

nasa

2 years ago

A Space Starburst

Welcome to one of the most active galaxies in our cosmic neighborhood: NGC 1569. This starburst galaxy creates stars at a rate 100 times faster than in our own galaxy, the Milky Way – and it’s been doing so for the past 100 million years.

NGC 1569 is about 11 million light-years away in the constellation Camelopardalis. Find out more about this sparkling galaxy here.

For the past few weeks, our Hubble Space Telescope explored #GalaxiesGalore! You can find more galaxy content and spectacular new images on Hubble’s Twitter, Facebook, and Instagram.

Credit: NASA, ESA, the Hubble Heritage Team (STScI/AURA), and A. Aloisi (STScI/ESA)

Tags

space stars universe galaxy science nasa astronomy Hubble

1K notes View Post

nasa

2 years ago

Prepare to be mesmerized… 😵‍💫

Feast your eyes on the magnificent galaxy M51, also known as the Whirlpool Galaxy! This hypnotic spiral galaxy was captured in visible light with Hubble’s Advanced Camera for Surveys. Living up to its nickname, the Whirlpool Galaxy has the traits of a typical spiral galaxy, like beautifully curving arms, pink star-forming regions, and brilliant blue strands of star clusters.

The Whirlpool Galaxy is located about 31 million light-years away in the constellation Canes Venatici.

Discover more about the Whirlpool Galaxy here.

Right now, the Hubble Space Telescope is exploring #GalaxiesGalore! Find more galaxy content and spectacular new images by following along on Hubble’s Twitter, Facebook, and Instagram.

Credit: NASA, ESA, S. Beckwith (STScI), and the Hubble Heritage Team (STScI/AURA)

Tags

space stars universe galaxy science nasa astronomy Hubble

3K notes View Post

nasa

2 years ago

Astrobiology: The Story of our Search for Life in the Universe

Astrobiologists study the origin, evolution, and distribution of life in the universe. This includes identifying evidence left behind by life that once survived on the ancient Earth, and extends to the search for life beyond our planet.

When looking for signs of life on other worlds, what are they looking for?

Things called biosignatures. For example, when you sign a piece of paper, your signature is evidence of your existence. Similarly, biosignatures are anything that can prove that life was once, or is, present in an environment.

Astrobiology: The Story Of Our Search For Life In The Universe

If we were very very lucky, we might spot something we know is life with a powerful telescope or receive a "phone call" or radio signal from alien civilizations. Those types of biosignatures would be obvious. But they would only let us identify advanced life.

For most of Earth’s history (billions of years), single-celled life like bacteria and archaea have been around. Humans have only been making radio transmissions for hundreds of years. So we have a better chance of finding life if we look for signs that have been around for very long periods of time.

Patterns in ancient rocks that were created by life are a great example. That can be anything like a dinosaur footprint or structures built by microorganisms, like stromatolites.

Molecules can also be biosignatures, like DNA left behind for detectives to discover. But DNA doesn’t last very long on its own in most environments, so other molecules like lipids (like natural oils, wax, and fat) might be a better choice if you are looking for signatures of life from millions (or billions) of years ago.

Even the balance of gases in a planet’s atmosphere can be a sign of past or present life. On Earth, biology plays a major role in maintaining the delicate composition of gases like nitrogen, oxygen, and carbon dioxide in the air that we breathe.

These are just a few examples of signs astrobiologists look for when searching for life amongst the stars! Research into these biosignatures inform many of our biggest missions, from observatories like the Hubble Space Telescope and the Webb Space Telescope to our Mars Sample Return endeavor.

Want to learn more about the search for life? Check out the latest issue of our comic-book style graphic history novel, Astrobiology: The Story of our Search for Life in the Universe. This new chapter is all about biosignatures.

Explore life in the universe with us by following NASA Astrobiology on Twitter and Facebook.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

artists on tumblr artwork space comic life universe history illustrators on tumblr science nasa illustrations explore comic book are we alone?

904 notes View Post

nasa

2 years ago

Meet NGC 2841

Location: In the constellation Ursa Major

Type: Flocculent spiral galaxy

Discovered by: William Herschel

NGC 2841 is a beautiful example of a flocculent spiral galaxy – a type with discontinuous, featherlike, and patchy arms. A bright cusp of starlight distinguishes the galaxy's center from the dust lanes that outline the group of almost white middle-aged stars. The far younger blue stars trace the spiral arms.

Find out more information about NGC 2841 here.

Right now, the Hubble Space Telescope is exploring #GalaxiesGalore! Find more galaxy content and spectacular new images by following along on Hubble’s Twitter, Facebook, and Instagram.

Credit: NASA, ESA, and the Hubble Heritage (STScI/AURA)-ESA/Hubble Collaboration; Acknowledgment: M. Crockett and S. Kaviraj (Oxford University, UK), R. O'Connell (University of Virginia), B. Whitmore (STScI), and the WFC3 Scientific Oversight Committee

Tags

space stars universe galaxy science nasa astronomy Hubble

1K notes View Post

nasa

3 years ago

Our Weird and Wonderful Galaxy of Black Holes

Black holes are hard to find. Like, really hard to find. They are objects with such strong gravity that light can’t escape them, so we have to rely on clues from their surroundings to find them.

When a star weighing more than 20 times the Sun runs out of fuel, it collapses into a black hole. Scientists estimate that there are tens of millions of these black holes dotted around the Milky Way, but so far we’ve only identified a few dozen. Most of those are found with a star, each circling around the other. Another name for this kind of pair is a binary system.That’s because under the right circumstances material from the star can interact with the black hole, revealing its presence.

The visualization above shows several of these binary systems found in our Milky Way and its neighboring galaxy. with their relative sizes and orbits to scale. The video even shows each system tilted the way we see it here from our vantage point on Earth. Of course, as our scientists gather more data about these black holes, our understanding of them may change.

The close orbit of a star and black hole causes the star to lose part of its outer layers to the black hole. A panning shot comes from behind a glowing star and reveals a black hole pulling a stream of stellar material into a swirling, hot disk around it.

If the star and black hole orbit close enough, the black hole can pull material off of its stellar companion! As the material swirls toward the black hole, it forms a flat ring called an accretion disk. The disk gets very hot and can flare, causing bright bursts of light.

In this visualization, an off-white, round star orbits around a black hole with glowing orange material encircling it. The black hole is pulling glowing white material off the star as they orbit each other. V404 Cygni is a black hole that erupted in 1989 and 2015 with an X-ray nova. It lies at a distance of 8,200 light-years. The black hole has a mass of 12 times the Sun, and its companion star has just under two Sun’s worth of mass. They orbit each other every 6.5 days.

V404 Cygni, depicted above, is a binary system where a star slightly smaller than the Sun orbits a black hole 10 times its mass in just 6.5 days. The black hole distorts the shape of the star and pulls material from its surface. In 2015, V404 Cygni came out of a 25-year slumber, erupting in X-rays that were initially detected by our Swift satellite. In fact, V404 Cygni erupts every couple of decades, perhaps driven by a build-up of material in the outer parts of the accretion disk that eventually rush in.

An illustration depicts what astronomers think is happening within a binary system with a high-mass star and a stellar-mass black hole. A huge, blue-white star radiates strands of 'wind' from its perimeter, with a bright object just to its left. The bright object is the shining disk of material that has collected from the star’s wind and swirls around the black hole before falling in.

In other cases, the black hole’s companion is a giant star with a strong stellar wind. This is like our Sun’s solar wind, but even more powerful. As material rushes out from the companion star, some of it is captured by the black hole’s gravity, forming an accretion disk.

A bright blue star and a black hole with a swirling disk of hot, glowing material orbit each other in this visualization of the Cygnus X-1 system. Cygnus X-1 is the first confirmed black hole. It lies at a distance of 7,200 light-years. The black hole has a mass of 21 times the Sun and its companion star has 40 Sun’s worth of mass. They orbit each other every 5.6 days.

A famous example of a black hole powered by the wind of its companion is Cygnus X-1. In fact, it was the first object to be widely accepted as a black hole! Recent observations estimate that the black hole’s mass could be as much as 20 times that of our Sun. And its stellar companion is no slouch, either. It weighs in at about 40 times the Sun.

Two very different black hole systems are shown together in this visualization. In one, called GRS 1915, a bright star and a black hole with a large swirling disk of glowing material orbit each other, filling nearly the whole image. They only complete a small portion of their orbit in the few seconds the GIF plays. The second system is much smaller one called H1705. It has a small, bead-sized star orbiting a tiny black hole that has a small disk of material. The small system completes three orbits in the few seconds the GIF plays.

We know our galaxy is peppered with black holes of many sizes with an array of stellar partners, but we've only found a small fraction of them so far. Scientists will keep studying the skies to add to our black hole menagerie.

Curious to learn more about black holes? Follow NASA Universe on Twitter and Facebook to keep up with the latest from our scientists and telescopes.

Make sure to follow us on Tumblr for your regular dose of space: http://nasa.tumblr.com

Tags

space Youtube stars universe science nasa astronomy astrophysics milky way black holes spaceblr black hole week data visualization

1K notes View Post

nasa

3 years ago

Space is a Dusty Place!

Butterfly Nebula

When you look at pictures of space, do you know what you’re actually seeing? A lot of the time the answer is dust!

HII region seen by Chandra X-ray Observatory

Clouds of dust drift through our galaxy. Telescopes can take pictures of these clouds when stars light them up. Who knew dust could be so beautiful? But it’s more than just pretty – we can learn a lot from it, too!

Stars like our Sun are born in dust clouds. Over time, leftover dust clumps together to help form planets. That makes it a little less dusty.

At certain times of the year, a band of sun-reflecting dust from the inner Solar System appears prominently just after sunset -- or just before sunrise -- and is called zodiacal light. Credit: Ruslan Merzlyakov/astrorms

But later, objects like comets and asteroids can create new dust by breaking up into tiny rocks. In our solar system, these rocky grains are called zodiacal dust. That’s because it’s mostly visible near the constellations of the zodiac. We can see the hazy glow it creates just after sunset or shortly before dawn sometimes, like in the picture above.

Around other stars, it’s called exozodiacal dust. Try saying that five times fast! It makes it hazy there too, so it can be hard to see distant planets.

Our Nancy Grace Roman Space Telescope will be really good at seeing how much of this dust is swirling around nearby stars. That will help future telescopes know the best places to look to find planets like Earth!

Roman will also see more distant objects. It will peer inside dust clouds where new stars are bursting into life. That will help our James Webb Space Telescope know where to look to find baby planets. Webb can zoom in for a more detailed look at these young worlds by seeing how they filter their host star’s light.

Roman will see huge patches of the sky – much bigger than our Hubble and Webb telescopes can see. These missions will team up to explore all kinds of cosmic mysteries!

Learn more about the exciting science Roman will investigate on Twitter and Facebook.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

stars universe galaxies space photography photoblr cosmos original photography

3K notes View Post

nasa

3 years ago

Happy New Year From NASA! The year 2021 was one for the books, so what will 2022 bring? No matter what, remember: You are made of star stuff. Sparkly, glorious star stuff.

What's this image? Click here. Credit: ESA/Hubble and NASA, A. Sarajedini Make sure to follow us on Tumblr for your regular dose of space!

Tags

space HAPPY NEW YEAR glitter stars universe new year science nasa sparkles astronomy hubble space telescope Hubble

3K notes View Post

nasa

3 years ago

Ever wanted to look back in time? This week, we’re launching a kind of time machine – a telescope so powerful it will help us see back some of the first stars and galaxies made after the Big Bang.

The James Webb Space Telescope is the largest and most advanced telescope we’ve ever put in space. With revolutionary technology, it will study 13.5 billion years of cosmic history and help humanity understand our place in the stars.

Tomorrow, Dec. 25, at 7:20 a.m. ET (12:20 UTC), the Webb Telescope is set to launch from French Guiana, beginning a 29-day journey to a spot a million miles away.

How to Watch:

In English:

Dec. 25

Live coverage starts at 6:00 a.m. ET/11:00 UTC

Facebook, YouTube, Twitter, Twitch

In Spanish:

Dec. 25

Live coverage starts at 6:30 a.m. ET/11:30 UTC

Facebook, YouTube, Twitter

Once Webb launches, the journey has only just begun. The telescope will begin a 2-week-long process of unfolding itself in space before settling in to explore the universe in ways we’ve never seen before.

Follow along on Twitter, Facebook and Instagram and with #UnfoldTheUniverse.

Tags

space Youtube universe history photographers on tumblr science nasa space exploration astronomy explore solar system technology cosmos JWST james webb space telescope unfoldtheuniverse

5K notes View Post

nasa

3 years ago

That’s a wrap! Thank you for all the wonderful questions. James Webb Space Telescope Planetary Scientist Dr. Naomi Rowe-Gurney answered questions about the science goals, capabilities, and her hopes for the world's most powerful telescope.

Check out her full Answer Time for more: Career | Science Goals | Capabilities

We hope you enjoyed today and learned something new about the Webb mission! Don’t miss the historic launch of this first-of-its kind space observatory. Tune in to NASA TV HERE on Dec. 22 starting at 7:20 a.m. EST (12:20 UTC).

If today’s Answer Time got you excited, explore all the ways you can engage with the mission before launch! Join our #UnfoldTheUniverse art challenge, our virtual social event with international space agencies, and countdown to liftoff with us. Check out all the ways to participate HERE.

Make sure to follow us on Tumblr for your regular dose of space!

Tags

space stars universe planets research science nasa astronomy planet explore solar system technology webb JWST james webb space telescope answertime Unfold the Universe WebbAT

753 notes View Post

nasa

3 years ago

Questions coming up from….

@teamadamsperret: Congrats on your PhD!! When people ask what you do, what's your reply?

@Anonymous: How does it feel, working in NASA?

@moonlighy: How did you find your love for this job?

@redbullanddepression: what the prettiest star in the sky in your opinion? also, you are a great role model as a queer woman who is attending university next year to major in aerospace engineering!!!

Tags

space stars universe planets science nasa astronomy women in stem explore solar system JWST james webb space telescope answertime Unfold the Universe WebbAT WebbCareer

1K notes View Post

nasa

3 years ago

Hi.dr.naomi.i have 2 questions.

1.Can this JAMES WEB T.S able to see Mercury, Venus and certain stars that are close to the sun either. I.

2.Why is the James Webb t.s.mirror yellow?

Any specific reason for this

Tags

space universe planets science nasa astronomy explore solar system webb JWST james webb space telescope big bang explained answertime Unfold the Universe WebbAT WebbCapabilities

610 notes View Post